WINBOND W25Q16BVZPIG

Manufacturer No:

W25Q16BVZPIG

Manufacturer:

WINBOND

Package:

8-WDFN Exposed Pad

Description:

Surface Mount SpiFlash® 8 Pin Memory IC SpiFlash® Series 16 Mb kb 6mm mm 18mA mA 8b b

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

W25Q16BVZPIG information

WINBOND W25Q16BVZPIG technical specifications, attributes, parameters and parts with similar specifications to WINBOND W25Q16BVZPIG.

Type
Parameter

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
8-WDFN Exposed Pad

Number of Pins
8

Operating Temperature
-40°C~85°C TA

Packaging
Tube

Series
SpiFlash®

Published
2010

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
3 (168 Hours)

Number of Terminations
8

ECCN Code
EAR99

Technology
FLASH - NOR

Voltage - Supply
2.7V~3.6V

Terminal Position
DUAL

Number of Functions
1

Supply Voltage
3V

Terminal Pitch
1.27mm

Pin Count
8

Operating Supply Voltage
3.3V

Supply Voltage-Max (Vsup)
3.6V

Supply Voltage-Min (Vsup)
2.7V

Interface
SPI, Serial

Memory Size
16Mb 2M x 8

Memory Type
Non-Volatile

Clock Frequency
104MHz

Access Time
6 ns

Memory Format
FLASH

Memory Interface
SPI - Quad I/O

Memory Width
8

Write Cycle Time - Word, Page
50μs, 3ms

Address Bus Width
1b

Density
16 Mb

Standby Current-Max
0.000005A

Sync/Async
Synchronous

Word Size
8b

Programming Voltage
2.7V

Serial Bus Type
SPI

Endurance
100000 Write/Erase Cycles

Data Retention Time-Min
20

Write Protection
HARDWARE/SOFTWARE

Length
6mm

Radiation Hardening
No

RoHS Status
RoHS Compliant

Lead Free
Lead Free

Download datasheets and manufacturer documentation for WINBOND W25Q16BVZPIG.

Datasheets:

winbondelectronics-w25q16bvsfig-datasheets-6563.pdf

PCN Packaging:

winbondelectronics-w29n02gvsiaa-pcnpackaging-8034.pdf

W25Q16BVZPIG Overview

A Non-Volatile-type memory can be classified as the memory type of this device. In addition, memory ics is available in a Tube case as well. Embedded in the 8-WDFN Exposed Pad case, memory ics is a single file. On the chip, there is an 16Mb 2M x 8 memory, which is the size of the chip's memory. There is a FLASH-format memory used in this device, which is the memory format used by mainstream devices. Featuring an extended operating temperature range of -40°C~85°C TA, this device allows it to be used in a variety of demanding applications. The device is capable of handling a supply voltage of 2.7V~3.6V volts. The recommended mounting type for memory ics is Surface Mount. A total of 8 terminations have been planted on the chip. The comprehensive working procedure of this part involves 1 functions. In order to power this memory device, 3V will be necessary. A clock frequency rotation within 104MHz is used for the ic memory chip to rotate data. A 8-pin package containing this memory device is used to house this device. The memory device in question has 8 pins, thus indicating that it has 8 memory locations that can be accessed. There is a note indicating that this memory chip operates at an 3.3V volt supply voltage. The memory chip utilizes a straightforward, high-efficiency mounting method, Surface Mount mounting. There is a nominal supply current rating of 18mA for this memory component. It is an important component of the SpiFlash® series memory devices used in a variety of applications. Its SPI-type serial bus helps transfer data to the CPU efficiently. A programming voltage of 2.7V is required to change a nonvolatile memory array's state.

W25Q16BVZPIG Features

Package / Case: 8-WDFN Exposed Pad
8 Pins
Operating Supply Voltage:3.3V

W25Q16BVZPIG Applications

There are a lot of Winbond Electronics
W25Q16BVZPIG Memory applications.

supercomputers
telecommunications
workstations,
DVD disk buffer
data buffer
nonvolatile BIOS memory
Camcorders
embedded logic
eDRAM
graphics card

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.