WINBOND W25Q128FWPIG

Manufacturer No:

W25Q128FWPIG

Manufacturer:

WINBOND

Package:

8-WDFN Exposed Pad

Description:

Surface Mount SpiFlash® 8 Pin Memory IC SpiFlash® Series 128 Mb kb 6mm mm

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

W25Q128FWPIG information

WINBOND W25Q128FWPIG technical specifications, attributes, parameters and parts with similar specifications to WINBOND W25Q128FWPIG.

Type
Parameter

Factory Lead Time
10 Weeks

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
8-WDFN Exposed Pad

Number of Pins
8

Operating Temperature
-40°C~85°C TA

Packaging
Tube

Series
SpiFlash®

Published
2016

Part Status
Active

Moisture Sensitivity Level (MSL)
3 (168 Hours)

Number of Terminations
8

Technology
FLASH - NOR

Voltage - Supply
1.65V~1.95V

Terminal Position
DUAL

Number of Functions
1

Supply Voltage
1.8V

Terminal Pitch
1.27mm

Pin Count
8

Qualification Status
Not Qualified

Operating Supply Voltage
1.8V

Supply Voltage-Max (Vsup)
1.95V

Supply Voltage-Min (Vsup)
1.7V

Interface
SPI, Serial

Memory Type
Non-Volatile

Operating Mode
SYNCHRONOUS

Clock Frequency
104MHz

Supply Current-Max
0.025mA

Access Time
6 ns

Memory Format
FLASH

Memory Interface
SPI - Quad I/O, QPI

Memory Width
1

Write Cycle Time - Word, Page
60?s, 5ms

Density
128 Mb

Standby Current-Max
0.00002A

Serial Bus Type
SPI

Endurance
100000 Write/Erase Cycles

Data Retention Time-Min
20

Write Protection
HARDWARE/SOFTWARE

Page Size
256B

Length
6mm

Width
5mm

RoHS Status
RoHS Compliant

Download datasheets and manufacturer documentation for WINBOND W25Q128FWPIG.

PCN Packaging:

winbondelectronics-w29n02gvsiaa-pcnpackaging-8034.pdf

W25Q128FWPIG Overview

In this case, the memory type of the device can be classified as Non-Volatile. Case Tube is available. An embedded 8-WDFN Exposed Pad case surrounds memory ics. It is estimated that the memory size on the chip is 128Mb 16M x 8. As with most mainstream devices, this one uses FLASH-format memory. Due to its wide temperature range of -40°C~85°C TA, this device is well suited to a wide range of applications that require high performance. With 1.65V~1.95V as the supply voltage, it is capable of handling memory ics. It is recommended to mount it in the Surface Mount mounting type. It is planted on the chip with 8 terminations. It supports up to 1 functions for comprehensive operation. There is a requirement for 1.8V to be supplied to this ic memory chip in order to operate. In order to operate effectively, the memory rotates at a clock frequency within a range of 104MHz. The ic memory chip comes in a package with 8 pins that allows it to be connected to a computer. The memory device has a total of 8 pins, thus indicating that it has a total of 8 memory locations. It is noted that the operating supply voltage of this memory is 1.8V. This chip uses Surface Mount mounting, a straightforward, high-efficiency method of mounting. This part, which belongs to the SpiFlash® series of memory devices, plays an important role in its target applications. It is helpful to carry data to the CPU using the SPI-type serial bus that this memory integrates with. In terms of power consumption, it can operate at a maximum supply of 0.025mA .

W25Q128FWPIG Features

Package / Case: 8-WDFN Exposed Pad
8 Pins
Operating Supply Voltage:1.8V

W25Q128FWPIG Applications

There are a lot of Winbond Electronics
W25Q128FWPIG Memory applications.

networking
personal computers
servers
supercomputers
telecommunications
workstations,
DVD disk buffer
data buffer
nonvolatile BIOS memory
Camcorders

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.