WINBOND W25P40VSNIG

Manufacturer No:

W25P40VSNIG

Manufacturer:

WINBOND

Package:

8-SOIC (0.154, 3.90mm Width)

Description:

3/3.3V V SpiFlash® 8 Pin Memory IC SpiFlash® Series 4.85mm mm

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

W25P40VSNIG information

WINBOND W25P40VSNIG technical specifications, attributes, parameters and parts with similar specifications to WINBOND W25P40VSNIG.

Type
Parameter

Mounting Type
Surface Mount

Package / Case
8-SOIC (0.154, 3.90mm Width)

Surface Mount
YES

Operating Temperature
-40°C~85°C TA

Packaging
Tube

Series
SpiFlash®

Published
2006

JESD-609 Code
e3

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
3 (168 Hours)

Number of Terminations
8

ECCN Code
EAR99

Terminal Finish
Matte Tin (Sn)

HTS Code
8542.32.00.51

Technology
CMOS

Voltage - Supply
2.7V~3.6V

Terminal Position
DUAL

Peak Reflow Temperature (Cel)
260

Number of Functions
1

Supply Voltage
3V

Terminal Pitch
1.27mm

Reach Compliance Code
unknown

Time@Peak Reflow Temperature-Max (s)
40

Pin Count
8

Qualification Status
Not Qualified

Supply Voltage-Max (Vsup)
3.6V

Power Supplies
3/3.3V

Supply Voltage-Min (Vsup)
2.7V

Interface
SPI, Serial

Memory Size
4Mb 512K x 8

Memory Type
Non-Volatile

Operating Mode
SYNCHRONOUS

Clock Frequency
40MHz

Supply Current-Max
0.025mA

Access Time
40 μs

Memory Format
FLASH

Memory Interface
SPI

Organization
4MX1

Memory Width
1

Write Cycle Time - Word, Page
5ms

Standby Current-Max
0.000005A

Memory Density
4194304 bit

Programming Voltage
2.7V

Serial Bus Type
SPI

Endurance
100000 Write/Erase Cycles

Data Retention Time-Min
20

Write Protection
HARDWARE/SOFTWARE

Download datasheets and manufacturer documentation for WINBOND W25P40VSNIG.

Datasheets:

winbondelectronics-w25p10vsnigtr-datasheets-0590.pdf

PCN Packaging:

winbondelectronics-w29n02gvsiaa-pcnpackaging-8034.pdf

W25P40VSNIG Overview

In this case, the memory type of the device can be classified as Non-Volatile. Case Tube is available. An embedded 8-SOIC (0.154, 3.90mm Width) case surrounds memory ics. It is estimated that the memory size on the chip is 4Mb 512K x 8. As with most mainstream devices, this one uses FLASH-format memory. Due to its wide temperature range of -40°C~85°C TA, this device is well suited to a wide range of applications that require high performance. With 2.7V~3.6V as the supply voltage, it is capable of handling memory ics. It is recommended to mount it in the Surface Mount mounting type. It is planted on the chip with 8 terminations. It supports up to 1 functions for comprehensive operation. There is a requirement for 3V to be supplied to this ic memory chip in order to operate. In order to operate effectively, the memory rotates at a clock frequency within a range of 40MHz. The memory device has a total of 8 pins, thus indicating that it has a total of 8 memory locations. In terms of power requirements, this memory chip uses only 3/3.3V . This part, which belongs to the SpiFlash® series of memory devices, plays an important role in its target applications. It is helpful to carry data to the CPU using the SPI-type serial bus that this memory integrates with. In terms of power consumption, it can operate at a maximum supply of 0.025mA . Nonvolatile memory arrays require 2.7V programming voltages to change their states.

W25P40VSNIG Features

Package / Case: 8-SOIC (0.154, 3.90mm Width)

W25P40VSNIG Applications

There are a lot of Winbond Electronics
W25P40VSNIG Memory applications.

networking
personal computers
servers
supercomputers
telecommunications
workstations,
DVD disk buffer
data buffer
nonvolatile BIOS memory
Camcorders

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.