ST VNQ830

Manufacturer No:

VNQ830

Manufacturer:

Package:

28-SOIC (0.295, 7.50mm Width)

Description:

13V N-Channel 1.27mm PMIC VIPower? Series VNQ830 28 Pin 13V 28-SOIC (0.295, 7.50mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

VNQ830 information

ST VNQ830 technical specifications, attributes, parameters and parts with similar specifications to ST VNQ830.

Type
Parameter

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
28-SOIC (0.295, 7.50mm Width)

Number of Pins
28

Operating Temperature
-40°C~150°C TJ

Packaging
Tube

Series
VIPower?

JESD-609 Code
e4

Feature
Auto Restart, Status Flag

Pbfree Code
yes

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
3 (168 Hours)

Number of Terminations
28

ECCN Code
EAR99

Resistance
65mOhm

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Subcategory
Peripheral Drivers

Max Power Dissipation
6.25W

Terminal Position
DUAL

Terminal Form
GULL WING

Number of Functions
2

Supply Voltage
13V

Terminal Pitch
1.27mm

Base Part Number
VNQ830

Number of Outputs
4

Output Type
N-Channel

Max Output Current
9A

Supply Voltage-Max (Vsup)
36V

Power Supplies
13V

Supply Voltage-Min (Vsup)
5.5V

Interface
On/Off

Current - Output (Max)
6A

Nominal Supply Current
12?A

Output Configuration
High Side

Power Dissipation
6.25W

Output Current
9A

Voltage - Supply (Vcc/Vdd)
Not Required

Input Type
Non-Inverting

Switch Type
General Purpose

Ratio - Input:Output
1:1

Voltage - Load
5.5V~36V

Driver Number of Bits
4

Fault Protection
Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage

Output Peak Current Limit-Nom
9A

Rds On (Typ)
65m ? (Max)

Drain to Source Resistance
130mOhm

Built-in Protections
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE

Download datasheets and manufacturer documentation for ST VNQ830.

Datasheets:

stmicroelectronics-vnq83013tr-datasheets-2326.pdf

VNQ830 Overview

It is packaged in the form of a Tube.It is included with the 28-SOIC (0.295, 7.50mm Width) package as well.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The lighting driver has a total of 4 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of N-Channel volts can be obtained with this LED driver.There are Auto Restart, Status Flag features available on the LED driving board.As you can see, it comes from the VNQ830 family.A total of 28 terminations can be found in it.During operation, the 28 pins are used.It is important to note that the LED driving board has 2 functions.From the lighting driver, there is a maximum output of 6AV.To comply with the operation criteria, the maximum output current is reduced to 9A.It is possible to obtain high efficiency with a supply voltage of 13V.Surface Mount is mounted in the way of this LED driving board.This LED driver is equipped with a total of 28 pins.In this case, there is 65mOhm resistance in the LED driving board.It is included in the VIPower? series.This results in a 9A output current.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.The maximum supply voltage for this lighting driver is set to 36V (Vsup).In order to operate normally, the supply voltage (Vsup) must remain above 5.5V.It has a power supply of 13V.

VNQ830 Features

Supplied from 13V
Resistance of 65mOhm

VNQ830 Applications

There are a lot of STMicroelectronics
VNQ830 Power Switches ICs applications.

Wireless/Networking Cards
Low Voltage I/O System Power
Hard Disk Drives
Solid-State Drives
Hot Swap
HDD and SSD
Hot Swap
Wireless Modem Data Cards
PC Cards
HDD, SSD

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.