ST VNQ660SP13TR

Manufacturer No:

VNQ660SP13TR

Manufacturer:

Package:

PowerSO-10 Exposed Bottom Pad

Description:

N-Channel 1.27mm PMIC VNQ660 10 Pin 13V PowerSO-10 Exposed Bottom Pad

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

VNQ660SP13TR information

ST VNQ660SP13TR technical specifications, attributes, parameters and parts with similar specifications to ST VNQ660SP13TR.

Type
Parameter

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
PowerSO-10 Exposed Bottom Pad

Number of Pins
10

Operating Temperature
-40°C~150°C TJ

Packaging
Tape & Reel (TR)

JESD-609 Code
e3

Feature
Status Flag

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
3 (168 Hours)

Number of Terminations
10

ECCN Code
EAR99

Resistance
50mOhm

Terminal Finish
Matte Tin (Sn) - annealed

Subcategory
Peripheral Drivers

Max Power Dissipation
113.6W

Technology
MOS

Terminal Position
DUAL

Terminal Form
GULL WING

Number of Functions
1

Supply Voltage
13V

Terminal Pitch
1.27mm

Base Part Number
VNQ660

Pin Count
10

Output Type
N-Channel

Max Output Current
18A

Operating Supply Voltage
36V

Interface
On/Off

Nominal Supply Current
6mA

Output Configuration
High Side

Power Dissipation
113.6W

Output Current
6A

Voltage - Supply (Vcc/Vdd)
Not Required

Max Supply Current
40mA

Input Type
Non-Inverting

Switch Type
General Purpose

Min Input Voltage
5.5V

Max Input Voltage
36V

Ratio - Input:Output
1:1

Voltage - Load
6V~36V

Driver Number of Bits
4

Fault Protection
Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage

Turn On Time
70 ?s

Rds On (Typ)
40m ?

Drain to Source Resistance
130mOhm

Built-in Protections
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE

Height Seated (Max)
3.75mm

Download datasheets and manufacturer documentation for ST VNQ660SP13TR.

Datasheets:

stmicroelectronics-vnq660spe-datasheets-8282.pdf

VNQ660SP13TR Overview

As you can see, it's packaged in the way of a Tape & Reel (TR).This file is included in package PowerSO-10 Exposed Bottom Pad.This LED driving board is mounted using the mounting type Surface Mount.There is a switch type of General Purpose.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.It is possible to use 4 outputs in the lighting driver.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.As far as features are concerned, the LED driving board has Status Flag.I believe it belongs to the VNQ660 family.As a result, there are 10 terminations.In order to operate, 10 pins are used.It contains 1 functions.It is necessary to reduce the maximum output current to 18A to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 13V.In this case, it is mounted in the way of Surface Mount.The LED driver has a total of 10 pins.It has 50mOhm resistance.When this is the case, the output current is set to 6A.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.Optimal efficiency requires a voltage of 36V.The maximum input voltage is 36V volts.A minimum input voltage of 5.5V volts is required for this LED driver.A maximum current requirement of 40mA is required for its operation.

VNQ660SP13TR Features

Supplied from 13V
Resistance of 50mOhm

VNQ660SP13TR Applications

There are a lot of STMicroelectronics
VNQ660SP13TR Power Switches ICs applications.

Storage Drives
Portable/Handheld Devices
Wireless/Networking Cards
Low Voltage I/O System Power
Hard Disk Drives
Solid-State Drives
Hot Swap
HDD and SSD
Hot Swap
Wireless Modem Data Cards

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.