ST VNQ5E050AKTR-E

Manufacturer No:

VNQ5E050AKTR-E

Manufacturer:

Package:

24-SOP (0.295, 7.50mm Width) Exposed Pad

Description:

8/28V N-Channel 0.8mm PMIC VIPower? Series VNQ5E050 24 Pin 13V 24-SOP (0.295, 7.50mm Width) Exposed Pad

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

VNQ5E050AKTR-E information

ST VNQ5E050AKTR-E technical specifications, attributes, parameters and parts with similar specifications to ST VNQ5E050AKTR-E.

Type
Parameter

Factory Lead Time
18 Weeks

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
24-SOP (0.295, 7.50mm Width) Exposed Pad

Number of Pins
24

Operating Temperature
-40°C~150°C TJ

Packaging
Tape & Reel (TR)

Series
VIPower?

Feature
Auto Restart

Part Status
Active

Moisture Sensitivity Level (MSL)
3 (168 Hours)

Number of Terminations
24

ECCN Code
EAR99

Resistance
50mOhm

Subcategory
Peripheral Drivers

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
NOT SPECIFIED

Number of Functions
1

Supply Voltage
13V

Terminal Pitch
0.8mm

Time@Peak Reflow Temperature-Max (s)
NOT SPECIFIED

Base Part Number
VNQ5E050

Pin Count
24

Qualification Status
Not Qualified

Output Type
N-Channel

Max Output Current
27A

Operating Supply Voltage
13V

Supply Voltage-Max (Vsup)
28V

Power Supplies
8/28V

Interface
On/Off

Nominal Supply Current
14mA

Output Configuration
High Side

Voltage - Supply (Vcc/Vdd)
Not Required

Max Supply Current
14mA

Input Type
Non-Inverting

Turn On Delay Time
20 ?s

Switch Type
General Purpose

Output Current per Channel
19A

Turn-Off Delay Time
35 ?s

Ratio - Input:Output
1:1

Voltage - Load
4.5V~28V

Driver Number of Bits
4

Fault Protection
Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage

Rds On (Typ)
50m ? (Max)

Built-in Protections
TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE

Output Current Flow Direction
SINK

Download datasheets and manufacturer documentation for ST VNQ5E050AKTR-E.

Datasheets:

stmicroelectronics-vnq5e050aktre-datasheets-5228.pdf

stmicroelectronics-vnq5e050aktre-datasheets-8019.pdf

stmicroelectronics-vnq5e050aktre-datasheets-8020.pdf

VNQ5E050AKTR-E Overview

As a result, it is packaged in the form of a Tape & Reel (TR).This package is included in 24-SOP (0.295, 7.50mm Width) Exposed Pad.Mounting type Surface Mount is selected for the LED driving board.A General Purpose switch type is owned by it.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.The LED driver is equipped with 4 outputs.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It is equipped with Auto Restart features.It comes under the family of VNQ5E050.A total of 24 terminations have been recorded.The operation is performed through the 24 pins.Currently, the lighting driver has a total of 1 functions.This operation requires the maximum output current to be decreased to 27A.High efficiency is possible when the supply voltage is set to 13V.Surface Mount is mounted in the way.24 pins are connected to it in total.Currently, the LED driving board has 50mOhm resistance.It is part of the VIPower? series.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.In this LED driver, the maximum supply voltage is configured to be 28V (Vsup).This part has a power supply of 8/28V volts.It is recommended to set the supply voltage to 13V for optimum efficiency.It has a maximum current requirement of 14mA.

VNQ5E050AKTR-E Features

Supplied from 13V
Resistance of 50mOhm

VNQ5E050AKTR-E Applications

There are a lot of STMicroelectronics
VNQ5E050AKTR-E Power Switches ICs applications.

PC Card Hot Swap
Storage Drives
Portable/Handheld Devices
Wireless/Networking Cards
Low Voltage I/O System Power
Hard Disk Drives
Solid-State Drives
Hot Swap
HDD and SSD
Hot Swap

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.