ST VNP14NV04-E

Manufacturer No:

VNP14NV04-E

Manufacturer:

Package:

TO-220-3

Description:

N-Channel PMIC OMNIFET II?, VIPower? Series VNP14N 3 Pin TO-220-3

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

VNP14NV04-E information

ST VNP14NV04-E technical specifications, attributes, parameters and parts with similar specifications to ST VNP14NV04-E.

Type
Parameter

Factory Lead Time
18 Weeks

Mount
Surface Mount, Through Hole

Mounting Type
Through Hole

Package / Case
TO-220-3

Number of Pins
3

Supplier Device Package
TO-220AB

Operating Temperature
-40°C~150°C TJ

Packaging
Tube

Series
OMNIFET II?, VIPower?

Part Status
Active

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Resistance
35mOhm

Max Operating Temperature
150°C

Min Operating Temperature
-40°C

Max Power Dissipation
74W

Base Part Number
VNP14N

Number of Outputs
1

Output Type
N-Channel

Max Output Current
18A

Operating Supply Voltage
6.8V

Number of Channels
1

Interface
On/Off

Max Supply Voltage
8V

Min Supply Voltage
6V

Element Configuration
Single

Nominal Supply Current
100?A

Output Configuration
Low Side

Power Dissipation
70W

Output Current
12A

Voltage - Supply (Vcc/Vdd)
Not Required

Input Type
Non-Inverting

Turn On Delay Time
250 ns

Switch Type
General Purpose

Rise Time
350ns

Drain to Source Voltage (Vdss)
55V

Fall Time (Typ)
150 ns

Turn-Off Delay Time
1.35 ?s

Continuous Drain Current (ID)
7A

Threshold Voltage
2.5V

Ratio - Input:Output
1:1

Voltage - Load
36V Max

Fault Protection
Current Limiting (Fixed), Over Temperature, Over Voltage

Drain to Source Breakdown Voltage
40V

Number of Drivers
1

Rds On (Typ)
35mOhm (Max)

Drain to Source Resistance
35mOhm

Height
4.6mm

Download datasheets and manufacturer documentation for ST VNP14NV04-E.

Datasheets:

stmicroelectronics-vnd14nv04tre-datasheets-2203.pdf

VNP14NV04-E Overview

The package is in the form of a Tube.It is included in the package TO-220-3.The lighting driver is mounted in the Through Hole position.General Purpose is the type of switch owned by it.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.The LED driver has a total of 1 outputs.The LED driving board operates with a supply voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.It is part of the VNP14N family of LED drivers.It is necessary to use the 3 pins in order to operate the LED driver.12AV is the maximum output of the LED driver.This results in the maximum output current dropping to 18A to meet the operation criteria.The lighting driver is mounted in the direction of Surface Mount, Through Hole.Lighting drivers with 35mOhm resistance are used.A component of this type is included in the OMNIFET II?, VIPower? series.This case results in a 12A output current.You can select from 1 channels.When using this LED driving board, it is recommended that the supply voltage is set to 6.8V.Stable operation is possible with a maximum operating temperature of 150°C°C.In order to ensure reliability, it must operate at a minimum temperature of -40°C degrees Celsius.It can handle a voltage of 8VV as its maximum supply voltage.It is possible to use a voltage as low as 6V V as a power supply voltage.A total of 1 drivers are included in the part.

VNP14NV04-E Features

Resistance of 35mOhm
1 channels

VNP14NV04-E Applications

There are a lot of STMicroelectronics
VNP14NV04-E Power Switches ICs applications.

Telecom and Network Systems
PC Card Hot Swap
Storage Drives
Portable/Handheld Devices
Wireless/Networking Cards
Low Voltage I/O System Power
Hard Disk Drives
Solid-State Drives
Hot Swap
HDD and SSD

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.