ST VND830E13TR

Manufacturer No:

VND830E13TR

Manufacturer:

Package:

16-SOIC (0.295, 7.50mm Width)

Description:

N-Channel PMIC VIPower? Series VND830 16 Pin 16-SOIC (0.295, 7.50mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

VND830E13TR information

ST VND830E13TR technical specifications, attributes, parameters and parts with similar specifications to ST VND830E13TR.

Type
Parameter

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
16-SOIC (0.295, 7.50mm Width)

Number of Pins
16

Operating Temperature
-40°C~150°C TJ

Packaging
Tape & Reel (TR)

Series
VIPower?

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Resistance
60mOhm

Max Power Dissipation
8.3W

Base Part Number
VND830

Number of Outputs
2

Output Type
N-Channel

Max Output Current
6A

Operating Supply Voltage
36V

Interface
On/Off

Nominal Supply Current
12?A

Output Configuration
High Side

Power Dissipation
8.3W

Output Current
9A

Voltage - Supply (Vcc/Vdd)
Not Required

Max Supply Current
12?A

Input Type
Non-Inverting

Min Input Voltage
5.5V

Max Input Voltage
36V

Ratio - Input:Output
1:1

Voltage - Load
5.5V~36V

Fault Protection
Current Limiting (Fixed), Open Load Detect, Over Temperature

Rds On (Typ)
60m ? (Max)

Radiation Hardening
No

RoHS Status
RoHS Compliant

Download datasheets and manufacturer documentation for ST VND830E13TR.

VND830E13TR Overview

As a result, it is packaged in the form of a Tape & Reel (TR).This package is included in 16-SOIC (0.295, 7.50mm Width).Mounting type Surface Mount is selected for the LED driving board.A General Purpose switch type is owned by it.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.The LED driver is equipped with 2 outputs.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It comes under the family of VND830.The operation is performed through the 16 pins.This operation requires the maximum output current to be decreased to 6A.Surface Mount is mounted in the way.Currently, the LED driving board has 60mOhm resistance.It is part of the VIPower? series.As a result, the output current is set to 9A.It is recommended to set the supply voltage to 36V for optimum efficiency.Input voltage is limited to 36V volts.A voltage of 5.5V volts is the minimum input voltage.It has a maximum current requirement of 12?A.

VND830E13TR Features

Resistance of 60mOhm

VND830E13TR Applications

There are a lot of STMicroelectronics
VND830E13TR Power Switches ICs applications.

PC Card Hot Swap
Storage Drives
Portable/Handheld Devices
Wireless/Networking Cards
Low Voltage I/O System Power
Hard Disk Drives
Solid-State Drives
Hot Swap
HDD and SSD
Hot Swap

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.