ST VND600SP

Manufacturer No:

VND600SP

Manufacturer:

Package:

PowerSO-10 Exposed Bottom Pad

Description:

N-Channel PMIC VND600 10 Pin 13V PowerSO-10 Exposed Bottom Pad

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

VND600SP information

ST VND600SP technical specifications, attributes, parameters and parts with similar specifications to ST VND600SP.

Type
Parameter

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
PowerSO-10 Exposed Bottom Pad

Number of Pins
10

Operating Temperature
-40°C~150°C TJ

Packaging
Tube

JESD-609 Code
e3

Pbfree Code
yes

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
3 (168 Hours)

Number of Terminations
10

Termination
Solder

ECCN Code
EAR99

Resistance
30mOhm

Terminal Finish
Matte Tin (Sn) - annealed

Voltage - Rated DC
36V

Max Power Dissipation
96.1W

Terminal Position
DUAL

Terminal Form
GULL WING

Number of Functions
1

Supply Voltage
13V

Base Part Number
VND600

Pin Count
10

Number of Outputs
2

Max Output Current
40A

Supply Voltage-Min (Vsup)
5.5V

Interface
On/Off

Nominal Supply Current
6mA

Output Configuration
High Side

Power Dissipation
96.1W

Output Current
25A

Voltage - Supply (Vcc/Vdd)
Not Required

Input Type
Non-Inverting

Switch Type
General Purpose

Ratio - Input:Output
1:1

Voltage - Load
5.5V~36V

Fault Protection
Current Limiting (Fixed), Over Temperature, Over Voltage

Input Current
10mA

Load Current
25A

Rds On (Typ)
30m ? (Max)

Drain to Source Resistance
100mOhm

Built-in Protections
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE

Length
9.4mm

Height Seated (Max)
3.75mm

Width
7.5mm

Radiation Hardening
No

RoHS Status
RoHS Compliant

Download datasheets and manufacturer documentation for ST VND600SP.

Datasheets:

stmicroelectronics-vnd600sp-datasheets-7810.pdf

VND600SP Overview

It is packaged in the manner of a Tube.There is a PowerSO-10 Exposed Bottom Pad package that includes it.In this case, the LED driving board is mounted as Surface Mount.This switch is of type General Purpose.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.There are 2 outputs available on this lighting driver.Operation is based on a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.The VND600 family consists of this type.It consists of 10 terminations in total.In order to operate, the 10 pins are used.It consists of 1 functions.In order to meet the operation criteria, the maximum output current drops to 40A.The supply voltage of 13V is conducive to high efficiency.As a result, it is mounted in the manner of Surface Mount.A total of 10 pins are included in this LED driver.In this LED driving board, there is 30mOhm resistance.In this case, the output current will be set to 25A.In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 5.5V.

VND600SP Features

Supplied from 13V
Resistance of 30mOhm

VND600SP Applications

There are a lot of STMicroelectronics
VND600SP Power Switches ICs applications.

Portable/Handheld Devices
Wireless/Networking Cards
Low Voltage I/O System Power
Hard Disk Drives
Solid-State Drives
Hot Swap
HDD and SSD
Hot Swap
Wireless Modem Data Cards
PC Cards

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.