ST VNB14NV04-E

Manufacturer No:

VNB14NV04-E

Manufacturer:

Package:

TO-263-3, D2Pak (2 Leads + Tab), TO-263AB

Description:

N-Channel 2.54mm PMIC OMNIFET II?, VIPower? Series VNB14 3 Pin TO-263-3, D2Pak (2 Leads + Tab), TO-263AB

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

VNB14NV04-E information

ST VNB14NV04-E technical specifications, attributes, parameters and parts with similar specifications to ST VNB14NV04-E.

Type
Parameter

Lifecycle Status
ACTIVE (Last Updated: 7 months ago)

Factory Lead Time
18 Weeks

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
TO-263-3, D2Pak (2 Leads + Tab), TO-263AB

Number of Pins
3

Operating Temperature
-40°C~150°C TJ

Packaging
Tube

Series
OMNIFET II?, VIPower?

JESD-609 Code
e3

Part Status
Active

Moisture Sensitivity Level (MSL)
3 (168 Hours)

Number of Terminations
2

ECCN Code
EAR99

Resistance
35mOhm

Terminal Finish
Matte Tin (Sn) - annealed

Max Power Dissipation
74W

Terminal Position
SINGLE

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
245

Number of Functions
1

Terminal Pitch
2.54mm

Time@Peak Reflow Temperature-Max (s)
30

Base Part Number
VNB14

JESD-30 Code
R-PSSO-G2

Number of Outputs
1

Output Type
N-Channel

Max Output Current
18A

Operating Supply Voltage
18V

Interface
On/Off

Nominal Supply Current
100?A

Output Configuration
Low Side

Power Dissipation
74W

Output Current
12A

Voltage - Supply (Vcc/Vdd)
Not Required

Max Supply Current
100?A

Input Type
Non-Inverting

Turn On Delay Time
80 ns

Switch Type
General Purpose

Rise Time
350ns

Fall Time (Typ)
150 ns

Turn-Off Delay Time
450 ns

Continuous Drain Current (ID)
14A

Ratio - Input:Output
1:1

Voltage - Load
36V Max

Fault Protection
Current Limiting (Fixed), Over Temperature, Over Voltage

Drain to Source Breakdown Voltage
42V

Download datasheets and manufacturer documentation for ST VNB14NV04-E.

Datasheets:

stmicroelectronics-vnd14nv04tre-datasheets-2203.pdf

VNB14NV04-E Overview

The package is in the form of a Tube.It is included in the package TO-263-3, D2Pak (2 Leads + Tab), TO-263AB.The lighting driver is mounted in the Surface Mount position.General Purpose is the type of switch owned by it.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.The LED driver has a total of 1 outputs.The LED driving board operates with a supply voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.It is part of the VNB14 family of LED drivers.It contains 2 terminations.It is necessary to use the 3 pins in order to operate the LED driver.Currently, there are 1 functions associated with the lighting driver.This results in the maximum output current dropping to 18A to meet the operation criteria.The lighting driver is mounted in the direction of Surface Mount.A total of 3 pins are present on it.Lighting drivers with 35mOhm resistance are used.A component of this type is included in the OMNIFET II?, VIPower? series.This case results in a 12A output current.When using this LED driving board, it is recommended that the supply voltage is set to 18V.There is a maximum current requirement of 100?A for its operation.

VNB14NV04-E Features

Resistance of 35mOhm

VNB14NV04-E Applications

There are a lot of STMicroelectronics
VNB14NV04-E Power Switches ICs applications.

Telecom and Network Systems
PC Card Hot Swap
Storage Drives
Portable/Handheld Devices
Wireless/Networking Cards
Low Voltage I/O System Power
Hard Disk Drives
Solid-State Drives
Hot Swap
HDD and SSD

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.