ST VN920SP13TR

Manufacturer No:

VN920SP13TR

Manufacturer:

Package:

PowerSO-10 Exposed Bottom Pad

Description:

N-Channel PMIC VIPower? Series VN920 10 Pin 13V PowerSO-10 Exposed Bottom Pad

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

VN920SP13TR information

ST VN920SP13TR technical specifications, attributes, parameters and parts with similar specifications to ST VN920SP13TR.

Type
Parameter

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
PowerSO-10 Exposed Bottom Pad

Number of Pins
10

Operating Temperature
-40°C~150°C TJ

Packaging
Tape & Reel (TR)

Series
VIPower?

JESD-609 Code
e0

Feature
Auto Restart

Pbfree Code
no

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
3 (168 Hours)

Number of Terminations
10

ECCN Code
EAR99

Resistance
15mOhm

Terminal Finish
TIN LEAD

Subcategory
Peripheral Drivers

Max Power Dissipation
96.1W

Technology
MOS

Terminal Position
DUAL

Terminal Form
GULL WING

Number of Functions
1

Supply Voltage
13V

Current Rating
5mA

Pin Count
10

Number of Outputs
1

Output Type
N-Channel

Operating Supply Voltage
36V

Interface
On/Off

Nominal Supply Current
5mA

Output Configuration
High Side

Power Dissipation
96.1W

Output Current
30A

Voltage - Supply (Vcc/Vdd)
Not Required

Max Supply Current
25mA

Input Type
Non-Inverting

Switch Type
General Purpose

Min Input Voltage
5.5V

Max Input Voltage
36V

Output Current per Channel
45A

Ratio - Input:Output
1:1

Voltage - Load
5.5V~36V

Driver Number of Bits
1

Fault Protection
Current Limiting (Fixed), Over Temperature, Over Voltage

Output Peak Current Limit-Nom
45A

Rds On (Typ)
15m ? (Max)

Drain to Source Resistance
50mOhm

Download datasheets and manufacturer documentation for ST VN920SP13TR.

Datasheets:

stmicroelectronics-vn920sp-datasheets-2339.pdf

VN920SP13TR Overview

It is packaged in the form of a Tape & Reel (TR).It is included with the PowerSO-10 Exposed Bottom Pad package as well.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The lighting driver has a total of 1 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of N-Channel volts can be obtained with this LED driver.There are Auto Restart features available on the LED driving board.As you can see, it comes from the VN920 family.A total of 10 terminations can be found in it.During operation, the 10 pins are used.It is important to note that the LED driving board has 1 functions.It is possible to obtain high efficiency with a supply voltage of 13V.Surface Mount is mounted in the way of this LED driving board.This LED driver is equipped with a total of 10 pins.In this case, there is 15mOhm resistance in the LED driving board.It is included in the VIPower? series.This results in a 30A output current.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.For maximum efficiency, the supply voltage should be set to 36V.The maximum input voltage of the LED driver is 36V volts.There is a minimum input voltage of 5.5V volts for this LED driver.This system has a maximum current requirement of 25mA.

VN920SP13TR Features

Supplied from 13V
Resistance of 15mOhm

VN920SP13TR Applications

There are a lot of STMicroelectronics
VN920SP13TR Power Switches ICs applications.

Wireless/Networking Cards
Low Voltage I/O System Power
Hard Disk Drives
Solid-State Drives
Hot Swap
HDD and SSD
Hot Swap
Wireless Modem Data Cards
PC Cards
HDD, SSD

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.