ST VN5E025AJ-E

Manufacturer No:

VN5E025AJ-E

Manufacturer:

Package:

PowerSSO-12

Description:

8/28V N-Channel 0.8mm PMIC VIPower? Series VN5E025 12 Pin 13V PowerSSO-12

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

VN5E025AJ-E information

ST VN5E025AJ-E technical specifications, attributes, parameters and parts with similar specifications to ST VN5E025AJ-E.

Type
Parameter

Lifecycle Status
ACTIVE (Last Updated: 7 months ago)

Factory Lead Time
42 Weeks

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
PowerSSO-12

Number of Pins
12

Operating Temperature
-40°C~150°C TJ

Packaging
Tube

Series
VIPower?

Feature
Auto Restart

Part Status
Active

Moisture Sensitivity Level (MSL)
3 (168 Hours)

Number of Terminations
12

ECCN Code
EAR99

Resistance
25mOhm

Subcategory
Peripheral Drivers

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
NOT SPECIFIED

Number of Functions
1

Supply Voltage
13V

Terminal Pitch
0.8mm

Time@Peak Reflow Temperature-Max (s)
NOT SPECIFIED

Base Part Number
VN5E025

Number of Outputs
1

Qualification Status
Not Qualified

Output Type
N-Channel

Max Output Current
60A

Operating Supply Voltage
13V

Supply Voltage-Max (Vsup)
28V

Power Supplies
8/28V

Interface
On/Off

Nominal Supply Current
3mA

Output Configuration
High Side

Output Current
60A

Voltage - Supply (Vcc/Vdd)
Not Required

Max Supply Current
3mA

Input Type
Non-Inverting

Turn On Delay Time
15 ?s

Switch Type
General Purpose

Output Current per Channel
43A

Turn-Off Delay Time
40 ?s

Ratio - Input:Output
1:1

Voltage - Load
4.5V~28V

Driver Number of Bits
1

Fault Protection
Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage

Rds On (Typ)
25m ? (Max)

Download datasheets and manufacturer documentation for ST VN5E025AJ-E.

Datasheets:

stmicroelectronics-vn5e025ajtre-datasheets-5362.pdf

stmicroelectronics-vn5e025aje-datasheets-4042.pdf

stmicroelectronics-vn5e025aje-datasheets-4043.pdf

stmicroelectronics-vn5e025aje-datasheets-4044.pdf

VN5E025AJ-E Overview

The package is in the form of a Tube.It is included in the package PowerSSO-12.The lighting driver is mounted in the Surface Mount position.General Purpose is the type of switch owned by it.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.The LED driver has a total of 1 outputs.The LED driving board operates with a supply voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.Currently, the LED driving board is equipped with Auto Restart features.It is part of the VN5E025 family of LED drivers.It contains 12 terminations.It is necessary to use the 12 pins in order to operate the LED driver.Currently, there are 1 functions associated with the lighting driver.This results in the maximum output current dropping to 60A to meet the operation criteria.The supply voltage can be 13V for high efficiency.The lighting driver is mounted in the direction of Surface Mount.A total of 12 pins are present on it.Lighting drivers with 25mOhm resistance are used.A component of this type is included in the VIPower? series.This case results in a 60A output current.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.This LED driver is configured to have a maximum supply voltage of 28V (Vsup).In this part, the power supply is set to 8/28V.When using this LED driving board, it is recommended that the supply voltage is set to 13V.There is a maximum current requirement of 3mA for its operation.

VN5E025AJ-E Features

Supplied from 13V
Resistance of 25mOhm

VN5E025AJ-E Applications

There are a lot of STMicroelectronics
VN5E025AJ-E Power Switches ICs applications.

Telecom and Network Systems
PC Card Hot Swap
Storage Drives
Portable/Handheld Devices
Wireless/Networking Cards
Low Voltage I/O System Power
Hard Disk Drives
Solid-State Drives
Hot Swap
HDD and SSD

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.