ST VN330SP

Manufacturer No:

VN330SP

Manufacturer:

Package:

PowerSO-10 Exposed Bottom Pad

Description:

N-Channel 1.27mm PMIC VN330 10 Pin 24V PowerSO-10 Exposed Bottom Pad

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

VN330SP information

ST VN330SP technical specifications, attributes, parameters and parts with similar specifications to ST VN330SP.

Type
Parameter

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
PowerSO-10 Exposed Bottom Pad

Number of Pins
10

Operating Temperature
-40°C~125°C TJ

Packaging
Tube

JESD-609 Code
e3

Feature
Status Flag

Pbfree Code
no

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
10

ECCN Code
EAR99

Terminal Finish
Matte Tin (Sn)

Subcategory
Peripheral Drivers

Terminal Position
DUAL

Terminal Form
GULL WING

Number of Functions
4

Supply Voltage
24V

Terminal Pitch
1.27mm

Base Part Number
VN330

Pin Count
10

Number of Outputs
4

Output Type
N-Channel

Supply Voltage-Max (Vsup)
36V

Interface
On/Off

Nominal Supply Current
10mA

Output Configuration
High Side

Output Current
700mA

Voltage - Supply (Vcc/Vdd)
Not Required

Input Type
Non-Inverting

Switch Type
General Purpose

Ratio - Input:Output
1:1

Voltage - Load
10V~36V

Driver Number of Bits
4

Fault Protection
Current Limiting (Fixed), Over Temperature

Rds On (Typ)
320m ? (Max)

Drain to Source Resistance
400mOhm

Turn Off Time
30 ?s

Built-in Protections
OVER CURRENT; THERMAL; UNDER VOLTAGE

Height Seated (Max)
3.75mm

Width
7.5mm

Radiation Hardening
No

RoHS Status
RoHS Compliant

Download datasheets and manufacturer documentation for ST VN330SP.

Datasheets:

stmicroelectronics-vn330sp-datasheets-8203.pdf

VN330SP Overview

It is packaged in the form of a Tube.It is included with the PowerSO-10 Exposed Bottom Pad package as well.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~125°C TJ.The lighting driver has a total of 4 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of N-Channel volts can be obtained with this LED driver.There are Status Flag features available on the LED driving board.As you can see, it comes from the VN330 family.A total of 10 terminations can be found in it.During operation, the 10 pins are used.It is important to note that the LED driving board has 4 functions.To comply with the operation criteria, the maximum output current is reduced to 700mA.It is possible to obtain high efficiency with a supply voltage of 24V.Surface Mount is mounted in the way of this LED driving board.This LED driver is equipped with a total of 10 pins.This results in a 700mA output current.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.The maximum supply voltage for this lighting driver is set to 36V (Vsup).

VN330SP Features

Supplied from 24V

VN330SP Applications

There are a lot of STMicroelectronics
VN330SP Power Switches ICs applications.

Wireless/Networking Cards
Low Voltage I/O System Power
Hard Disk Drives
Solid-State Drives
Hot Swap
HDD and SSD
Hot Swap
Wireless Modem Data Cards
PC Cards
HDD, SSD

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.