V62/03616-02XE-Texas Instruments-Price, Stock & Datasheet

The SM320C32-EP is a member of the 320C3x generation of digital signal processors from Texas Instruments. The SM320C32-EP is an enhanced 32-bit floating-point processor manufactured in 0.7-um triple-level-metal CMOS technology. The enhancements to the 320C3x architecture include a variable-width external-memory interface, faster instruction cycle time, power-down modes, two-channel DMA coprocessor with configurable priorities, flexible bootloader, relocatable interrupt-vector table, and edge- or level-triggered interrupts.

The internal busing and special digital signal processing instruction set of the SM320C32-EP have the speed and flexibility to execute up to 50 million floating-point operations per second (MFLOPS). The SM320C32-EP optimizes speed by implementing functions in hardware that other processors implement through software or microcode. This hardware-intensive approach provides performance previously unavailable on a single chip.

For additional information when designing for cold temperature operation, please see Texas Instruments application report 320C3x, 320C4x and 320MCM42x Power-up Sensitivity at Cold Temperature, literature number SGUA001.

Controlled Baseline
- One Assembly/Test Site, One Fabrication Site
Extended Temperature Performance of –55°C to 125°C
Enhanced Diminishing Manufacturing Sources (DMS) Support
Enhanced Product Change Notification
Qualification Pedigree
High-Performance Floating-Point Digital Signal Processor (DSP)
SM320C32-50EP (5 V)
- 40-ns Instruction Cycle Time
- 275 MOPS
- 50 MFLOPS
- 25 MIPS
SM320C32-60EP (5 V)
- 33-ns Instruction Cycle Time
- 330 MOPS
- 60 MFLOPS
- 30 MIPS
32-Bit High-Performance CPU
16-/32-Bit Integer and 32-/40-Bit Floating-Point Operations
32-Bit Instruction Word, 24-Bit Addresses
Two 256 × 32-Bit Single-Cycle, Dual-Access On-Chip RAM Blocks
Flexible Boot-Program Loader
On-Chip Memory-Mapped Peripherals:
- One Serial Port
- Two 32-Bit Timers
- Two-Channel Direct Memory Access (DMA) Coprocessor With Configurable Priorities
Enhanced External Memory Interface That Supports 8-/16-/32-Bit-Wide External RAM for Data Access and Program Execution From 16-/32-Bit-Wide External RAM
SMJ320C30 and SMJ320C31 Object Code Compatible
Fabricated Using Enhanced Performance Implanted CMOS (EPIC) Technology by Texas Instruments
144-Pin Plastic Quad Flatpack (PCM Suffix) 5 V
Eight Extended-Precision Registers
Two Address Generators With Eight Auxiliary Registers and Two Auxiliary Register Arithmetic Units (ARAUs)
Two Low-Power Modes
Two- and Three-Operand Instructions
Parallel Arithmetic Logic Unit (ALU) and Multiplier Execution in a Single Cycle
Block-Repeat Capability
Zero-Overhead Loops With Single-Cycle Branches
Conditional Calls and Returns
Interlocked Instructions for Multiprocessing Support
One External Pin, PRGW, That Configures the External-Program-Memory Width to 16 or 32 Bits
Two Sets of Memory Strobes (STRB0\ and STRB1\) and One I/O Strobe (IOSTRB)\ Allow Zero-Glue Logic Interface to Two Banks of Memory and One Bank of External Peripherals
Separate Bus-Control Registers for Each Strobe-Control Wait-State Generation, External Memory Width, and Data Type Size
STRB0\ and STRB1\ Memory Strobes Handle 8-, 16-, or 32-Bit External Data Accesses (Reads and Writes)
Multiprocessor Support Through the HOLD\ and HOLDA\ Signals Is Valid for All Strobes

Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits.
EPIC is a trademark of Texas Instruments Incorporated.
All trademarks are the property of their respective owners.