UCC29421N-TI-Price, Stock & Datasheet

UCC29421N Overview

With its 16-DIP (0.300, 7.62mm) package, the switching controller fits the needs of most applications. For outputs of 1, this dc motor controller is suitable. Tube solid enclosure protects the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control operates at 1.8V~8V and has a 1.8V~8V supply voltage. Worked in a -40°C~85°C TA dc switcher before. In this switching controller, the switch can be set to 150kHz~1.2MHz. The Through Hole allows it to be used for dc dc regulator in general. In order to control switching efficiently, the dcdc regulator features Enable, Frequency Control, Low Battery, Reset. SWITCHING CONTROLLER analog IC connects the switch converters. Switching converters are designed with the terminal (s) at position DUAL . The 16 terminations can be used for a wide range of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 3V is input. Searching "UCC29421" will return other relevant dc to dc converter ics. 16 pins are on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. Based on the test statistics, DC regulator outputs voltage 8V. It should be noted that the dc to dc regulator only accepts 8V voltage as input voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 1A. In most applications and prototype designs, DC switcher is qualified as a Surface Mount, Through Hole. Switching controllers work at 2MHz Hz. This value is CONFIGURABLE PEAK CURRENT MODE; PROGRAMMABLE PFM TECHNIQUE so that DC to DC voltage regulator better serves the purpose.

UCC29421N Features

Transistor Driver Outputs
Switching Frequency: 150kHz~1.2MHz
Enable, Frequency Control, Low Battery, Reset
PULSE WIDTH MODULATION
Frequency: 2MHz
CONFIGURABLE PEAK CURRENT MODE; PROGRAMMABLE PFM TECHNIQUE