UCC2813DTR-3G4-TI-Price, Stock & Datasheet

UCC2813DTR-3G4 Overview

Capsuled in the 8-SOIC (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. PMIC packaging is solid with a Tape & Reel (TR) enclosure. A total of Transistor Driver dc switching's outputs can be handled by it. Voltages 3.6V~12V are the dc control's supply voltage and operating voltage, respectively. Work well in dc switchers with a -40°C~85°C TA. A generalization of dc dc regulator can be made using Surface Mount. To ensure efficient switching, this dcdc regulator features a Frequency Control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. A variety of dc switching's functions can be performed on 8 terminations. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's voltage input is 10V. You can find other relevant dc to dc converter ics by searching "UCC2813". Pins number 8 of switching converter in total. Specially, switching converter corresponds to type Switching Regulator or Controllers. An input voltage of 4V is the minimum required for the dc dc voltage regulator. Test statistics indicate DC regulator outputs 1V voltage. In most cases, the dc dc regulator's output current is 200mA. This information should be noted when you begin working with the component. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 100 % during power-up and power-down. The Surface Mount makes DC switcher suitable for most applications and prototypes. Switching controller operates at 1MHz Hz. Switching controller is necessary to provide a voltage of 10V. There should be 30mA current exceeding 30mA supplied to the controller. At 1MHz, this controller will mostly work as expected.