TI UC3572D

Manufacturer No:

UC3572D

Manufacturer:

Package:

8-SOIC (0.154, 3.90mm Width)

Description:

8 Terminals 4.75V~30V 8-Pin UC3572 DC to DC converter IC SWITCHING CONTROLLER 1 Outputs 100kHz Transistor Driver

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

UC3572D information

TI UC3572D technical specifications, attributes, parameters and parts with similar specifications to TI UC3572D.

Type
Parameter

Lifecycle Status
ACTIVE (Last Updated: 1 week ago)

Factory Lead Time
6 Weeks

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
8-SOIC (0.154, 3.90mm Width)

Number of Pins
8

Weight
72.603129mg

Operating Temperature
0°C~70°C TA

Packaging
Tube

JESD-609 Code
e4

Pbfree Code
yes

Part Status
Active

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Subcategory
Switching Regulator or Controllers

Technology
BIPOLAR

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Frequency
300kHz

Base Part Number
UC3572

Function
Step-Up/Step-Down

Output Voltage
-70V

Output Type
Transistor Driver

Operating Supply Voltage
30V

Input Voltage-Nom
5V

Analog IC - Other Type
SWITCHING CONTROLLER

Output Configuration
Negative

Output Current
500mA

Voltage - Supply (Vcc/Vdd)
4.75V~30V

Control Features
Current Limit, Ramp

Input Voltage (Min)
4.75V

Topology
Flyback

Control Mode
VOLTAGE-MODE

Frequency - Switching
100kHz

Control Technique
PULSE WIDTH MODULATION

Synchronous Rectifier
No

Switcher Configuration
SINGLE

Duty Cycle (Max)
92%

Height
1.75mm

Length
4.9mm

Width
3.91mm

Thickness
1.58mm

RoHS Status
RoHS Compliant

Lead Free
Lead Free

Download datasheets and manufacturer documentation for TI UC3572D.

PCN Design/Specification:

texasinstruments-tl7726cd-pcndesignspecification-4206.pdf

UC3572D Overview

In the 8-SOIC (0.154, 3.90mm Width) package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. There is a Tube solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 4.75V~30V volts and has 4.75V~30V supply voltage. Suitable for working in an dc switcher that has a 0°C~70°C TA. It can switch at 100kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. To provide efficient switching control, Current Limit, Ramp is included in the dcdc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. Various 8 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 5V. In addition to "UC3572", there are other relevant dc to dc converter ics you can find. There are 8 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. It is recommended that the dc dc voltage regulator's minimum input voltage be 4.75V. DC regulator outputs -70V voltage based on test statistics. A starting point for a project is to note down the dc dc regulator's usual output current, which is 500mA. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. A frequency of 300kHz is set for the switching controller. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 30V.

UC3572D Features

Transistor Driver Outputs
Switching Frequency: 100kHz
Current Limit, Ramp
PULSE WIDTH MODULATION
Frequency: 300kHz

UC3572D Applications

There are a lot of Texas Instruments
UC3572D DC to DC converter applications.

Network technology
Automation technology
CMM
Various precision measuring instruments
Various precision measuring detectors
Flaw detection equipment
Balance equipment
Industrial robots
Industrial controllers
Die casting equipment

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.