ST UC2844BN

UC2844BN Overview

As a result of 8-DIP (0.300, 7.62mm) compact design, the switching controller is compatible with most applications. 1 outputs are supported by the dc motor controller. An enclosure of Tube is used to package the PMIC. The system can process Transistor Driver dc switching's outputs (s). 10V~30V is the supply voltage and the operating voltage of the dc control. Workable in an dc switcher where -25°C~85°C TA is the -25°C~85°C TArm. The switching controller is capable of switching at the Up to 500kHz position. dc dc regulator can be generalized using Through Hole. Switching control is made easier with the dcdc regulator's Frequency Control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. switching converters terminal (s) are designed to be at DUAL. There are many different types of terminations for 8. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 15V. A search for "UC2844" will reveal other relevant dc to dc converter ics. 8 pins are present on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. Statistically, the DC regulator outputs 5.05V voltage. Voltages 30V are the maximum that the dc to dc regulator will accept. It's important to remember that the dc dc regulator's normaloutput current is 1A, so you should note it down when starting a new project. The maximum duty cycle of this voltage regulator dc to dc is set to 50 % to ensure reliability during power-up and power-down. As DC switcher has a Through Hole, it's suitable for most applications and prototype designs. Switching controller operates at 500kHz Hz. The supply current of the voltage controller is 12mA. There is a possibility that a current higher than 17mA will cause improper operation of the component and possibly damage switching voltage regulators.

UC2844BN Features

Transistor Driver Outputs
Switching Frequency: Up to 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 500kHz

UC2844BN Applications

There are a lot of STMicroelectronics
UC2844BN DC to DC converter applications.

• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment
• Injection molding machinery