TI UC27131N

Manufacturer No:

UC27131N

Manufacturer:

Package:

8-DIP (0.300, 7.62mm)

Description:

25V Bipolar 2.54mm PMIC UC27131 8 Pin 25V 8-DIP (0.300, 7.62mm)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

UC27131N information

TI UC27131N technical specifications, attributes, parameters and parts with similar specifications to TI UC27131N.

Type
Parameter

Mounting Type
Through Hole

Package / Case
8-DIP (0.300, 7.62mm)

Surface Mount
NO

Number of Pins
8

Weight
528.605208mg

Operating Temperature
-40°C~85°C TA

Packaging
Tube

JESD-609 Code
e4

Pbfree Code
no

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Subcategory
Peripheral Drivers

Terminal Position
DUAL

Number of Functions
1

Supply Voltage
25V

Terminal Pitch
2.54mm

Base Part Number
UC27131

Pin Count
8

Number of Outputs
1

Output Type
Bipolar

Max Output Current
700mA

Power Supplies
25V

Interface
On/Off

Nominal Supply Current
2.5mA

Output Configuration
Low Side

Output Current
300mA

Voltage - Supply (Vcc/Vdd)
Not Required

Max Supply Current
2.5mA

Propagation Delay
6 ?s

Input Type
Non-Inverting

Turn On Delay Time
6 ?s

Switch Type
General Purpose

Min Input Voltage
8V

Max Input Voltage
65V

Output Current per Channel
300mA

Nominal Input Voltage
65V

Ratio - Input:Output
1:1

Voltage - Load
8V~65V

Driver Number of Bits
1

Output Peak Current Limit-Nom
0.9A

Built-in Protections
TRANSIENT; OVER CURRENT

Height Seated (Max)
5.33mm

Width
7.62mm

Radiation Hardening
No

Download datasheets and manufacturer documentation for TI UC27131N.

Datasheets:

texasinstruments-uc27131n-datasheets-6634.pdf

PCN Obsolescence/ EOL:

texasinstruments-uc2715n-pcnobsolescenceeol-3951.pdf

texasinstruments-uc2715n-pcnobsolescenceeol-3952.pdf

UC27131N Overview

As a result, it is packaged in the form of a Tube.This package is included in 8-DIP (0.300, 7.62mm).Mounting type Through Hole is selected for the LED driving board.A General Purpose switch type is owned by it.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.The LED driver is equipped with 1 outputs.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of Bipolar volts can be achieved by this LED driver.It comes under the family of UC27131.A total of 8 terminations have been recorded.The operation is performed through the 8 pins.Currently, the lighting driver has a total of 1 functions.This operation requires the maximum output current to be decreased to 700mA.High efficiency is possible when the supply voltage is set to 25V.8 pins are connected to it in total.As a result, the output current is set to 300mA.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.This part has a power supply of 25V volts.It is recommended to set the supply voltage to 65V for optimum efficiency.Input voltage is limited to 65V volts.A voltage of 8V volts is the minimum input voltage.It has a maximum current requirement of 2.5mA.

UC27131N Features

Supplied from 25V

UC27131N Applications

There are a lot of Texas Instruments
UC27131N Power Switches ICs applications.

PC Card Hot Swap
Storage Drives
Portable/Handheld Devices
Wireless/Networking Cards
Low Voltage I/O System Power
Hard Disk Drives
Solid-State Drives
Hot Swap
HDD and SSD
Hot Swap

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.