ST UA741IN

Manufacturer No:

UA741IN

Manufacturer:

Package:

8-DIP (0.300, 7.62mm)

Description:

1 Channels 25mA per Channel 10nA 70 dB Instrumentational OP Amps 0.2μA 20V 10V~44V ±5V~22V UA741 8 Pins 8-DIP (0.300, 7.62mm)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

UA741IN information

ST UA741IN technical specifications, attributes, parameters and parts with similar specifications to ST UA741IN.

Type
Parameter

Mount
Through Hole

Mounting Type
Through Hole

Package / Case
8-DIP (0.300, 7.62mm)

Number of Pins
8

Weight
4.535924g

Operating Temperature
-40°C~105°C

Packaging
Tube

JESD-609 Code
e3

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Terminal Finish
Matte Tin (Sn)

Subcategory
Operational Amplifier

Technology
BIPOLAR

Terminal Position
DUAL

Number of Functions
1

Supply Voltage
15V

Terminal Pitch
2.54mm

Base Part Number
UA741

Pin Count
8

Operating Supply Voltage
20V

Number of Channels
1

Operating Supply Current
1.7mA

Power Dissipation
500mW

Output Current
25mA

Slew Rate
0.5V/μs

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
General Purpose

Common Mode Rejection Ratio
70 dB

Current - Input Bias
10nA

Voltage - Supply, Single/Dual (±)
10V~44V ±5V~22V

Output Current per Channel
25mA

Input Offset Voltage (Vos)
5mV

Bandwidth
1MHz

Neg Supply Voltage-Nom (Vsup)
-15V

Unity Gain BW-Nom
1000 kHz

Voltage Gain
106.02dB

Average Bias Current-Max (IIB)
0.2μA

Low-Offset
NO

Frequency Compensation
YES

Supply Voltage Limit-Max
22V

Voltage - Input Offset
1mV

Height
3.32mm

Length
10.92mm

Width
6.6mm

REACH SVHC
No SVHC

Download datasheets and manufacturer documentation for ST UA741IN.

Datasheets:

stmicroelectronics-ua741idt-datasheets-3779.pdf

UA741IN Overview

Packaged in a 8-DIP (0.300, 7.62mm) case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. The op amp is delivered to you in a Tube case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 15V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 5mV for this buffer op amp. The mounting type that is recommended for this electrical part is Through Hole. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~105°C . As long as the supply current of the chip does not exceed 1.7mA, this op amp ic can operate. 106.02dB should remain the voltage gain. As far as the device is concerned, buffer amplifier has 1 channels. The operating supply voltage of the buffer op amp is rated at 20V.

UA741IN Features

8 Pins
supply voltage of 15V
106.02dB voltage gain

UA741IN Applications

There are a lot of STMicroelectronics
UA741IN Instrumentational OP Amps applications.

Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.