ST TSV853AIST

Manufacturer No:

TSV853AIST

Manufacturer:

Package:

10-TFSOP, 10-MSOP (0.118, 3.00mm Width)

Description:

2 Channels 70mA per Channel 27nA 72 dB Instrumentational OP Amps 0.11μA 2.5V~5.5V TSV853 10 Pins 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

TSV853AIST information

ST TSV853AIST technical specifications, attributes, parameters and parts with similar specifications to ST TSV853AIST.

Type
Parameter

Lifecycle Status
ACTIVE (Last Updated: 7 months ago)

Factory Lead Time
20 Weeks

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
10-TFSOP, 10-MSOP (0.118, 3.00mm Width)

Number of Pins
10

Operating Temperature
-40°C~125°C

Packaging
Tape & Reel (TR)

Part Status
Active

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
10

ECCN Code
EAR99

Subcategory
Operational Amplifier

Packing Method
TAPE AND REEL

Technology
CMOS

Terminal Position
DUAL

Terminal Form
GULL WING

Number of Functions
2

Supply Voltage
2.7V

Terminal Pitch
0.5mm

Base Part Number
TSV853

Pin Count
10

Output Type
Rail-to-Rail

Number of Channels
2

Nominal Supply Current
120μA

Output Current
26mA

Slew Rate
0.7V/μs

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
General Purpose

Common Mode Rejection Ratio
72 dB

Current - Input Bias
27nA

Voltage - Supply, Single/Dual (±)
2.5V~5.5V

Output Current per Channel
70mA

Input Offset Voltage (Vos)
800μV

Bandwidth
1.3MHz

Unity Gain BW-Nom
1300 kHz

Voltage Gain
110dB

Average Bias Current-Max (IIB)
0.11μA

Low-Offset
NO

Frequency Compensation
YES

Supply Voltage Limit-Max
6V

Low-Bias
NO

Micropower
YES

Bias Current-Max (IIB) @25C
0.06μA

Programmable Power
NO

Power
NO

Height
940μm

Download datasheets and manufacturer documentation for ST TSV853AIST.

Datasheets:

stmicroelectronics-tsv851aict-datasheets-1886.pdf

TSV853AIST Overview

There is a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the General Purpose-type. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. We are approaching the 10h termination of the year. In total, there are 10 pins on this op amp ic. This linear amplifier should be powered by an 2.7V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 10 pins are located on the operational amplifiers. The input offset voltage is 800μV. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . The buffer amplifier is capable of operating from a supply current of 130μA . It is recommended to keep the voltage gain at 110dB at all times. On the buffer amps, there are 2 channels that can be used. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. This linear amplifier pack is based on the TAPE AND REEL axis.

TSV853AIST Features

10 Pins
supply voltage of 2.7V
110dB voltage gain
Output Type: Rail-to-Rail

TSV853AIST Applications

There are a lot of STMicroelectronics
TSV853AIST Instrumentational OP Amps applications.

Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
Signal operation

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.