ST TSV6392IDT

Manufacturer No:

TSV6392IDT

Manufacturer:

Package:

8-SOIC (0.154, 3.90mm Width)

Description:

2 Channels 72mA per Channel 1pA 60 dB Instrumentational OP Amps 0.0001μA 1.5V~5.5V TSV6392 8 Pins 8-SOIC (0.154, 3.90mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

TSV6392IDT information

ST TSV6392IDT technical specifications, attributes, parameters and parts with similar specifications to ST TSV6392IDT.

Type
Parameter

Lifecycle Status
ACTIVE (Last Updated: 7 months ago)

Factory Lead Time
20 Weeks

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
8-SOIC (0.154, 3.90mm Width)

Number of Pins
8

Operating Temperature
-40°C~125°C

Packaging
Tape & Reel (TR)

JESD-609 Code
e4

Part Status
Active

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Subcategory
Operational Amplifier

Packing Method
TAPE AND REEL

Technology
CMOS

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
2

Supply Voltage
1.8V

Base Part Number
TSV6392

Pin Count
8

Number of Channels
2

Operating Supply Current
60μA

Nominal Supply Current
60μA

Output Current
72mA

Slew Rate
1.1V/μs

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
General Purpose

Common Mode Rejection Ratio
60 dB

Current - Input Bias
1pA

Voltage - Supply, Single/Dual (±)
1.5V~5.5V

Output Current per Channel
72mA

Input Offset Voltage (Vos)
3mV

Bandwidth
2.4MHz

Unity Gain BW-Nom
2000 kHz

Voltage Gain
98dB

Average Bias Current-Max (IIB)
0.0001μA

Low-Offset
NO

Frequency Compensation
YES

Supply Voltage Limit-Max
6V

Low-Bias
YES

Micropower
YES

Bias Current-Max (IIB) @25C
0.00001μA

Height
1.25mm

Download datasheets and manufacturer documentation for ST TSV6392IDT.

Datasheets:

stmicroelectronics-tsv6395ipt-datasheets-9725.pdf

TSV6392IDT Overview

Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. A General Purpose-type buffer amplifier is shown here. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. A total of 8 terminations have been reported in the past few weeks. Buffer amplifier has a total of 8 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 1.8V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. An 8-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 3mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. Using a supply current of 60μA , this buffer op amp will be able to operate. Keeping the voltage gain at 98dB is the best course of action. 2 channels are available on the instrumentation amplifier. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps.

TSV6392IDT Features

8 Pins
supply voltage of 1.8V
98dB voltage gain
Output Type: Rail-to-Rail

TSV6392IDT Applications

There are a lot of STMicroelectronics
TSV6392IDT Instrumentational OP Amps applications.

single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.