ST TSV612ID

Manufacturer No:

TSV612ID

Manufacturer:

Package:

8-SOIC (0.154, 3.90mm Width)

Description:

2 Channels 63mA per Channel 1pA 64 dB Instrumentational OP Amps 1.5V~5.5V TSV612 8 Pins 8-SOIC (0.154, 3.90mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

TSV612ID information

ST TSV612ID technical specifications, attributes, parameters and parts with similar specifications to ST TSV612ID.

Type
Parameter

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
8-SOIC (0.154, 3.90mm Width)

Number of Pins
8

Operating Temperature
-40°C~85°C

Packaging
Tube

JESD-609 Code
e4

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Subcategory
Operational Amplifier

Technology
CMOS

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
2

Supply Voltage
1.8V

Time@Peak Reflow Temperature-Max (s)
30

Base Part Number
TSV612

Pin Count
8

Number of Outputs
1

Output Voltage
3.3V

Max Output Current
3A

Polarity
Positive

Number of Channels
2

Operating Supply Current
10.5?A

Nominal Supply Current
14?A

Output Current
63mA

Quiescent Current
10mA

Accuracy
1 %

Slew Rate
0.04V/?s

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
General Purpose

Common Mode Rejection Ratio
64 dB

Current - Input Bias
1pA

Max Input Voltage
30V

Voltage - Supply, Single/Dual (±)
1.5V~5.5V

Output Current per Channel
63mA

Input Offset Voltage (Vos)
4mV

Bandwidth
120 kHz

Unity Gain BW-Nom
100 kHz

Voltage Gain
93dB

Low-Offset
NO

Frequency Compensation
YES

Supply Voltage Limit-Max
6V

Download datasheets and manufacturer documentation for ST TSV612ID.

Datasheets:

stmicroelectronics-tsv611ilt-datasheets-9608.pdf

TSV612ID Overview

It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 1.8V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 4mV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. A supply current of 10.5?A can be used to operate this linear amplifier. There should be no change in the voltage gain at 93dB. There are a total of 2 channels available on the op amps. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The quiescent current is 10mA.

TSV612ID Features

8 Pins
supply voltage of 1.8V
93dB voltage gain
Output Type: Rail-to-Rail

TSV612ID Applications

There are a lot of STMicroelectronics
TSV612ID Instrumentational OP Amps applications.

Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.