ST TSH22ID

Manufacturer No:

TSH22ID

Manufacturer:

Package:

8-SOIC (0.154, 3.90mm Width)

Description:

2 Channels 37mA per Channel 100nA 80 dB Instrumentational OP Amps 0.65μA 15V 3V~30V ±1.5V~15V TSH22 8 Pins 8-SOIC (0.154, 3.90mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

TSH22ID information

ST TSH22ID technical specifications, attributes, parameters and parts with similar specifications to ST TSH22ID.

Type
Parameter

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
8-SOIC (0.154, 3.90mm Width)

Number of Pins
8

Operating Temperature
-40°C~125°C

Packaging
Tube

JESD-609 Code
e3

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Terminal Finish
Matte Tin (Sn) - annealed

Subcategory
Operational Amplifier

Technology
BIPOLAR

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
2

Supply Voltage
15V

Time@Peak Reflow Temperature-Max (s)
30

Base Part Number
TSH22

Pin Count
8

Operating Supply Voltage
15V

Number of Channels
2

Nominal Supply Current
2.75mA

Power Dissipation
500mW

Output Current
37mA

Slew Rate
15V/μs

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
General Purpose

Common Mode Rejection Ratio
80 dB

Current - Input Bias
100nA

Voltage - Supply, Single/Dual (±)
3V~30V ±1.5V~15V

Output Current per Channel
37mA

Input Offset Voltage (Vos)
2.5mV

Bandwidth
25MHz

Neg Supply Voltage-Nom (Vsup)
-15V

Unity Gain BW-Nom
25000 kHz

Voltage Gain
100dB

Average Bias Current-Max (IIB)
0.65μA

Low-Offset
NO

Frequency Compensation
YES AVCL>=10

Bias Current-Max (IIB) @25C
0.65μA

Dual Supply Voltage
9V

Height
1.25mm

Length
5mm

Width
4mm

Download datasheets and manufacturer documentation for ST TSH22ID.

Datasheets:

stmicroelectronics-tsh22id-datasheets-8719.pdf

TSH22ID Overview

A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tube case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 15V volts. It should be noted that this op amp is a type of Operational Amplifier device. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 2.5mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . An 2.15mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. There are 2 channels on the operational amplifiers. The operating supply voltage of the buffer op amp is rated at 15V.

TSH22ID Features

8 Pins
supply voltage of 15V
100dB voltage gain

TSH22ID Applications

There are a lot of STMicroelectronics
TSH22ID Instrumentational OP Amps applications.

Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.