ST TS974IDT

Manufacturer No:

TS974IDT

Manufacturer:

Package:

14-SOIC (0.154, 3.90mm Width)

Description:

4 Channels 100mA per Channel 200nA 60 dB Instrumentational OP Amps 1μA 5V 2.7V~10V ±1.35V~5V TS974 14 Pins 14-SOIC (0.154, 3.90mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

TS974IDT information

ST TS974IDT technical specifications, attributes, parameters and parts with similar specifications to ST TS974IDT.

Type
Parameter

Lifecycle Status
ACTIVE (Last Updated: 6 months ago)

Factory Lead Time
10 Weeks

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
14-SOIC (0.154, 3.90mm Width)

Number of Pins
14

Operating Temperature
-40°C~125°C

Packaging
Cut Tape (CT)

JESD-609 Code
e4

Part Status
Active

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
14

ECCN Code
EAR99

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Subcategory
Operational Amplifier

Packing Method
TAPE AND REEL

Technology
BIPOLAR

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
4

Supply Voltage
2.5V

Terminal Pitch
1.27mm

Time@Peak Reflow Temperature-Max (s)
30

Pin Count
14

Output Type
Rail-to-Rail

Operating Supply Voltage
5V

Number of Channels
4

Operating Supply Current
2mA

Nominal Supply Current
11.2mA

Output Current
100mA

Min Input Voltage
2.7V

Slew Rate
4V/μs

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
General Purpose

Common Mode Rejection Ratio
60 dB

Current - Input Bias
200nA

Max Input Voltage
10V

Voltage - Supply, Single/Dual (±)
2.7V~10V ±1.35V~5V

Output Current per Channel
100mA

Input Offset Voltage (Vos)
5mV

Bandwidth
12MHz

Neg Supply Voltage-Nom (Vsup)
-2.5V

Unity Gain BW-Nom
12000 kHz

Voltage Gain
80dB

Average Bias Current-Max (IIB)
1μA

Low-Offset
NO

Download datasheets and manufacturer documentation for ST TS974IDT.

Datasheets:

stmicroelectronics-ts971ilt-datasheets-9581.pdf

stmicroelectronics-ts974idt-datasheets-6550.pdf

stmicroelectronics-ts974idt-datasheets-6553.pdf

TS974IDT Overview

In order to protect the op amps, a 14-SOIC (0.154, 3.90mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Cut Tape (CT) cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 14. It consists of a total of 14 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 2.5V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. It has 14 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 5mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 2mA and 10 . Maintain 80dB as the voltage gain. Buffer op amp is equipped with 4 channels on the device. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The operating supply voltage of the buffer op amp is rated at 5V. As a result of this, the buffer amplifier is packed in TAPE AND REEL.

TS974IDT Features

14 Pins
supply voltage of 2.5V
80dB voltage gain
Output Type: Rail-to-Rail

TS974IDT Applications

There are a lot of STMicroelectronics
TS974IDT Instrumentational OP Amps applications.

Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.