ST TS951IN

Manufacturer No:

TS951IN

Manufacturer:

Package:

8-DIP (0.300, 7.62mm)

Description:

1 Channels 10mA per Channel 35nA 50 dB Instrumentational OP Amps 0.2?A 2.7V~12V TS951 8 Pins 8-DIP (0.300, 7.62mm)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

TS951IN information

ST TS951IN technical specifications, attributes, parameters and parts with similar specifications to ST TS951IN.

Type
Parameter

Mount
Through Hole

Mounting Type
Through Hole

Package / Case
8-DIP (0.300, 7.62mm)

Number of Pins
8

Operating Temperature
-40°C~125°C

Packaging
Tube

JESD-609 Code
e3

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Terminal Finish
Matte Tin (Sn)

Subcategory
Operational Amplifier

Technology
BICMOS

Terminal Position
DUAL

Peak Reflow Temperature (Cel)
NOT SPECIFIED

Number of Functions
1

Supply Voltage
3V

Terminal Pitch
2.54mm

Time@Peak Reflow Temperature-Max (s)
NOT SPECIFIED

Base Part Number
TS951

Pin Count
8

Qualification Status
Not Qualified

Output Type
Rail-to-Rail

Number of Channels
1

Operating Supply Current
950?A

Nominal Supply Current
1.4mA

Output Current
10mA

Slew Rate
1V/?s

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
General Purpose

Common Mode Rejection Ratio
50 dB

Current - Input Bias
35nA

Voltage - Supply, Single/Dual (±)
2.7V~12V

Output Current per Channel
10mA

Input Offset Voltage (Vos)
6mV

Bandwidth
3MHz

Unity Gain BW-Nom
3000 kHz

Voltage Gain
86dB

Average Bias Current-Max (IIB)
0.2?A

Low-Offset
NO

Frequency Compensation
YES

Low-Bias
NO

Micropower
NO

Programmable Power
NO

Power
NO

Length
9.27mm

Download datasheets and manufacturer documentation for ST TS951IN.

Datasheets:

stmicroelectronics-ts954idt-datasheets-9741.pdf

TS951IN Overview

There is a 8-DIP (0.300, 7.62mm) case in which the instrumentation amplifier is packaged. Buffer amps of this type are called General Purpose-types. A Tube case is used to deliver the buffer op amp. The number of terminations is approaching the 8 mark. The total number of pins on linear amplifier is 8. The linear amplifier should be run at 3V at all times, so please keep that in mind when using it. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 8 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 6mV. For this electronic part, it is recommended that you mount it with type Through Hole. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureIt is possible to operate this buffer amplifier from a supply current of 950?A . 86dB should be the voltage gain. Op amp ic has 1 channels. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer.

TS951IN Features

8 Pins
supply voltage of 3V
86dB voltage gain
Output Type: Rail-to-Rail

TS951IN Applications

There are a lot of STMicroelectronics
TS951IN Instrumentational OP Amps applications.

Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.