TS5A23167DCURE4-TI-Price, Stock & Datasheet

TS5A23167DCURE4 Overview

As the electronic part is packed in 8-VFSOP (0.091, 2.30mm Width), international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to -40°C~85°C TA. Total terminations are 8. The electronic part provides high-quality output because it has 1 channels. Powered by a 1.8V voltage supply, the electrical part should be switched on and run. The electrical component body receives 8 pins. Circuits based on SPST - NC switching are used to construct these analog switch ics. Try searching with TS5A23167 to find analog multiplexer variants. An switch multiplexer with 900mOhm internal resistance has a value of 900mOhm. Datasheets for 8 pin functions are available upon request. The analogue multiplexer in this example is a typical Multiplexer or Switches. Multiplexers should not be powered above 5.5V in normal situations. The analog switch ic is of the Single supply type and is cost-effective. The lowest voltage the electronic part should receive is 1.65V. An operating current of 10nA would be sufficient for this switch device. Using a single voltage supply, this switch device consumes 1.65V~5.5V volts. When the digital multiplexer is charged above 100nA, damage can occur. Operating the 2 inputs requires 2 inputs.