ST TS27M2CPT

Manufacturer No:

TS27M2CPT

Manufacturer:

Package:

8-TSSOP (0.173, 4.40mm Width)

Description:

45mA per Channel 1pA 65 dB Instrumentational OP Amps 0.00015μA 8V 3V~16V ±1.5V~8V TS27M2 8 Pins 8-TSSOP (0.173, 4.40mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

TS27M2CPT information

ST TS27M2CPT technical specifications, attributes, parameters and parts with similar specifications to ST TS27M2CPT.

Type
Parameter

Lifecycle Status
ACTIVE (Last Updated: 7 months ago)

Factory Lead Time
12 Weeks

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
8-TSSOP (0.173, 4.40mm Width)

Number of Pins
8

Operating Temperature
0°C~70°C

Packaging
Tape & Reel (TR)

JESD-609 Code
e4

Part Status
Active

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Subcategory
Operational Amplifier

Packing Method
TAPE AND REEL

Technology
CMOS

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
2

Supply Voltage
10V

Terminal Pitch
0.65mm

Time@Peak Reflow Temperature-Max (s)
10

Pin Count
8

Operating Supply Voltage
8V

Number of Elements
2

Power Supplies
5/10V

Operating Supply Current
150μA

Nominal Supply Current
400μA

Output Current
45mA

Slew Rate
0.6V/μs

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
General Purpose

Common Mode Rejection Ratio
65 dB

Current - Input Bias
1pA

Voltage - Supply, Single/Dual (±)
3V~16V ±1.5V~8V

Output Current per Channel
45mA

Input Offset Voltage (Vos)
10mV

Gain Bandwidth Product
1MHz

Unity Gain BW-Nom
1000 kHz

Voltage Gain
93.98dB

Average Bias Current-Max (IIB)
0.00015μA

Low-Offset
NO

Frequency Compensation
YES

Voltage - Input Offset
1.1mV

Low-Bias
YES

Download datasheets and manufacturer documentation for ST TS27M2CPT.

Datasheets:

stmicroelectronics-ts27m2cdt-datasheets-4463.pdf

TS27M2CPT Overview

The linear amplifier is packaged in a 8-TSSOP (0.173, 4.40mm Width) case which makes it easy for the consumer to handle. Op amps are General Purpose types of amplifier on the chip. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. There have been a total of 8 terminations over the past year. In this case, there are 8 pins on the board. Please take in mind that op amp should be run at 10V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 8 pins are available on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 10mV. This electronic part is best mounted with type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of 0°C~70°C . You can run this op amp ic on 150μA . Op amp is a member of the 93.98dB's 93.98dB family. It is possible to count 2 elements on this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 8V voltage. To pack the operational amplifier ics, TAPE AND REEL is adopted as the packing method.

TS27M2CPT Features

8 Pins
supply voltage of 10V
93.98dB voltage gain

TS27M2CPT Applications

There are a lot of STMicroelectronics
TS27M2CPT Instrumentational OP Amps applications.

Proportional operation circuits
Inverse/same-phase proportional circuit
Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.