ST TS27L4CN

Manufacturer No:

TS27L4CN

Manufacturer:

Package:

14-DIP (0.300, 7.62mm)

Description:

4 Channels 45mA per Channel 1pA 65 dB Instrumentational OP Amps 0.00015μA 8V 3V~16V ±1.5V~8V TS27L4 14 Pins 14-DIP (0.300, 7.62mm)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

TS27L4CN information

ST TS27L4CN technical specifications, attributes, parameters and parts with similar specifications to ST TS27L4CN.

Type
Parameter

Mount
Through Hole

Mounting Type
Through Hole

Package / Case
14-DIP (0.300, 7.62mm)

Number of Pins
14

Operating Temperature
0°C~70°C

Packaging
Tube

JESD-609 Code
e4

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
14

ECCN Code
EAR99

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Subcategory
Operational Amplifier

Technology
CMOS

Terminal Position
DUAL

Number of Functions
4

Supply Voltage
10V

Base Part Number
TS27L4

Pin Count
14

Operating Supply Voltage
8V

Power Supplies
10V

Number of Channels
4

Operating Supply Current
10μA

Nominal Supply Current
60μA

Slew Rate
0.04V/μs

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
General Purpose

Common Mode Rejection Ratio
65 dB

Current - Input Bias
1pA

Voltage - Supply, Single/Dual (±)
3V~16V ±1.5V~8V

Output Current per Channel
45mA

Input Offset Voltage (Vos)
10mV

Bandwidth
100 kHz

Unity Gain BW-Nom
100 kHz

Voltage Gain
100dB

Average Bias Current-Max (IIB)
0.00015μA

Low-Offset
NO

Frequency Compensation
YES

Voltage - Input Offset
1.1mV

Low-Bias
YES

Micropower
YES

Height
5.1mm

Length
20mm

Width
7.1mm

REACH SVHC
No SVHC

Radiation Hardening
No

RoHS Status
RoHS Compliant

Download datasheets and manufacturer documentation for ST TS27L4CN.

Datasheets:

stmicroelectronics-ts27l4aid-datasheets-6388.pdf

TS27L4CN Overview

Packaged in a 14-DIP (0.300, 7.62mm) case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. The op amp is delivered to you in a Tube case. There is a growing number of terminations approaching the number of 14. The pins on this board total to 14 in total. I would like to remind you that this buffer op amp should be powered by an 10V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. A total of 14 pins are present on the instrumentation amplifier. There is an input offset voltage of 10mV for this buffer op amp. The mounting type that is recommended for this electrical part is Through Hole. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . As long as the supply current of the chip does not exceed 10μA, this op amp ic can operate. 100dB should remain the voltage gain. As far as the device is concerned, buffer amplifier has 4 channels. The operating supply voltage of the buffer op amp is rated at 8V.

TS27L4CN Features

14 Pins
supply voltage of 10V
100dB voltage gain

TS27L4CN Applications

There are a lot of STMicroelectronics
TS27L4CN Instrumentational OP Amps applications.

Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.