ST TS272CN

Manufacturer No:

TS272CN

Manufacturer:

Package:

8-DIP (0.300, 7.62mm)

Description:

2 Channels 45mA per Channel 1pA 65 dB Instrumentational OP Amps 0.00015μA 8V 3V~16V ±1.5V~8V TS272 8 Pins 8-DIP (0.300, 7.62mm)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

TS272CN information

ST TS272CN technical specifications, attributes, parameters and parts with similar specifications to ST TS272CN.

Type
Parameter

Mount
Through Hole

Mounting Type
Through Hole

Package / Case
8-DIP (0.300, 7.62mm)

Number of Pins
8

Operating Temperature
0°C~70°C

Packaging
Tube

JESD-609 Code
e3

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Terminal Finish
Matte Tin (Sn) - annealed

Subcategory
Operational Amplifier

Technology
CMOS

Terminal Position
DUAL

Number of Functions
2

Supply Voltage
10V

Base Part Number
TS272

Pin Count
8

Operating Supply Voltage
8V

Power Supplies
10V

Number of Channels
2

Operating Supply Current
1mA

Nominal Supply Current
3mA

Slew Rate
5.5V/μs

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
General Purpose

Common Mode Rejection Ratio
65 dB

Current - Input Bias
1pA

Voltage - Supply, Single/Dual (±)
3V~16V ±1.5V~8V

Output Current per Channel
45mA

Input Offset Voltage (Vos)
10mV

Bandwidth
3.5MHz

Unity Gain BW-Nom
3500 kHz

Voltage Gain
83.52dB

Average Bias Current-Max (IIB)
0.00015μA

Low-Offset
NO

Frequency Compensation
YES

Voltage - Input Offset
1.1mV

Low-Bias
YES

Micropower
NO

Programmable Power
NO

Power
NO

Height
3.32mm

Length
10.92mm

Width
6.6mm

REACH SVHC
No SVHC

Download datasheets and manufacturer documentation for ST TS272CN.

Datasheets:

stmicroelectronics-ts272cd-datasheets-3321.pdf

TS272CN Overview

In the package, you will find a 8-DIP (0.300, 7.62mm)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. A Tube case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 10V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. The op amp ic has an array of 8 pins on it. Op amp rates 10mV as input offset voltage. For this electrical component, Through Hole is the recommended mounting type. According to the manufacturer, this buffer op amp works well at 0°C~70°C , which is a good operating temperature. Using an 1mA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 83.52dB for the time being. On the buffer amps, there are 2 channels that can be used. The operating supply voltage of the buffer op amp is rated at 8V.

TS272CN Features

8 Pins
supply voltage of 10V
83.52dB voltage gain

TS272CN Applications

There are a lot of STMicroelectronics
TS272CN Instrumentational OP Amps applications.

Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
Signal operation
Video computer boards

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.