TI TPS40132RHBT

TPS40132RHBT Overview

Capsuled in the 32-VFQFN Exposed Pad package, the switching controller can be used for a wide range of applications. There is enough capacity in the dc motor controller to generate the output for the 2 input. PMIC packaging is solid with a Tape & Reel (TR) enclosure. A total of Transistor Driver dc switching's outputs can be handled by it. Voltages 4.5V~28V are the dc control's supply voltage and operating voltage, respectively. Work well in dc switchers with a -40°C~85°C TA. Using this switching controller, it is possible to switch at 100kHz~1.2MHz. A generalization of dc dc regulator can be made using Surface Mount. To ensure efficient switching, this dcdc regulator features a Current Limit, Enable, Frequency Control, Power Good, Soft Start. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. A switching converters's terminal (s) sits at the QUAD position. A variety of dc switching's functions can be performed on 32 terminations. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's voltage input is 5V. You can find other relevant dc to dc converter ics by searching "TPS40132". Pins number 32 of switching converter in total. Specially, switching converter corresponds to type Switching Regulator or Controllers. Test statistics indicate DC regulator outputs 5.8V voltage. In most cases, the dc dc regulator's output current is 40A. This information should be noted when you begin working with the component. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 87.5 % during power-up and power-down. Switching controller operates at 350kHz Hz. The value of DC to DC voltage regulator is set at ALSO OPERATES AS LDO REGULATOR in order to fulfill the requirements more effectively. A dc switching in a dormant state uses 1mA. The maximum input voltage of dc switcher is 40V, so users should limit their voltage accordingly. Voltage 1V is needed for the supply. There will be 40A current output from the dc switcher above 40A. The datasheet indicates that the switching converter can output 5.8V volts at its maximum. 600mV voltage output is lower than 600mV.

TPS40132RHBT Features

Transistor Driver Outputs
Switching Frequency: 100kHz~1.2MHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 87.5 %
Frequency: 350kHz
ALSO OPERATES AS LDO REGULATOR

TPS40132RHBT Applications

There are a lot of Texas Instruments
TPS40132RHBT DC to DC converter applications.

• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment
• Injection molding machinery
• Various CNC machine tools
• Machining centers