TI TPS40074RHLTG4

Manufacturer No:

TPS40074RHLTG4

Manufacturer:

Package:

20-VFQFN Exposed Pad

Description:

20 Terminals 4.5V~28V 20-Pin TPS40074 DC to DC converter IC SWITCHING CONTROLLER 1 Outputs Up to 1MHz Transistor Driver

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

TPS40074RHLTG4 information

TI TPS40074RHLTG4 technical specifications, attributes, parameters and parts with similar specifications to TI TPS40074RHLTG4.

Type
Parameter

Mounting Type
Surface Mount

Package / Case
20-VFQFN Exposed Pad

Surface Mount
YES

Number of Pins
20

Weight
47.287005mg

Operating Temperature
-40°C~85°C TA

Packaging
Tape & Reel (TR)

JESD-609 Code
e4

Pbfree Code
no

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
2 (1 Year)

Number of Terminations
20

ECCN Code
EAR99

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Subcategory
Switching Regulator or Controllers

Terminal Position
QUAD

Peak Reflow Temperature (Cel)
260

Terminal Pitch
0.5mm

Base Part Number
TPS40074

Function
Step-Down

Number of Outputs
1

Output Voltage
23V

Output Type
Transistor Driver

Max Output Current
20A

Input Voltage-Nom
12V

Analog IC - Other Type
SWITCHING CONTROLLER

Output Configuration
Positive

Output Current
20A

Voltage - Supply (Vcc/Vdd)
4.5V~28V

Quiescent Current
1.5mA

Control Features
Current Limit, Enable, Frequency Control, Power Good, Soft Start

Max Output Voltage
23V

Topology
Buck

Min Input Voltage
4.5V

Control Mode
VOLTAGE-MODE

Frequency - Switching
Up to 1MHz

Max Input Voltage
28V

Control Technique
PULSE WIDTH MODULATION

Synchronous Rectifier
Yes

Min Output Voltage
700mV

Switcher Configuration
PUSH-PULL

Max Frequency
1MHz

Duty Cycle (Max)
95%

Height
900?m

Length
4.5mm

Width
3.5mm

Radiation Hardening
No

Download datasheets and manufacturer documentation for TI TPS40074RHLTG4.

Datasheets:

texasinstruments-tps40074rhltg4-datasheets-3591.pdf

TPS40074RHLTG4 Overview

In the 20-VFQFN Exposed Pad package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. There is a Tape & Reel (TR) solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 4.5V~28V volts and has 4.5V~28V supply voltage. Suitable for working in an dc switcher that has a -40°C~85°C TA. It can switch at Up to 1MHz. As it has a Surface Mount value, it can be used for general dc dc regulator. To provide efficient switching control, Current Limit, Enable, Frequency Control, Power Good, Soft Start is included in the dcdc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. QUAD are the position of the terminal of the switching converters. Various 20 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. In addition to "TPS40074", there are other relevant dc to dc converter ics you can find. There are 20 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. DC regulator outputs 23V voltage based on test statistics. A starting point for a project is to note down the dc dc regulator's usual output current, which is 20A. DC regulator1MHz has the maximum frequency. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 28V. In dormant mode, 1.5mA is used. Since the dc switcher's maximum input voltage is 28V, the voltage must be regulated accordingly. Voltage 4.5V must be supplied. An output current greater than 20A cannot be provided by the dc switcher. Depending on the datasheet, the switching converter can output 23V volts at its peak. A voltage controller's lowest output voltage cannot be less than 700mV.

TPS40074RHLTG4 Features

Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION

TPS40074RHLTG4 Applications

There are a lot of Texas Instruments
TPS40074RHLTG4 DC to DC converter applications.

Network technology
Automation technology
CMM
Various precision measuring instruments
Various precision measuring detectors
Flaw detection equipment
Balance equipment
Industrial robots
Industrial controllers
Die casting equipment

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.