TI TPS2223ADBR

Manufacturer No:

TPS2223ADBR

Manufacturer:

Package:

24-SSOP (0.209, 5.30mm Width)

Description:

3.35V 0.65mm PMIC TPS2223 24 Pin 3.3V 24-SSOP (0.209, 5.30mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

TPS2223ADBR information

TI TPS2223ADBR technical specifications, attributes, parameters and parts with similar specifications to TI TPS2223ADBR.

Type
Parameter

Lifecycle Status
ACTIVE (Last Updated: 2 days ago)

Factory Lead Time
6 Weeks

Mounting Type
Surface Mount

Package / Case
24-SSOP (0.209, 5.30mm Width)

Surface Mount
YES

Number of Pins
24

Weight
172.39345mg

Operating Temperature
-40°C~85°C TA

Packaging
Tape & Reel (TR)

JESD-609 Code
e4

Feature
Status Flag

Pbfree Code
yes

Part Status
Active

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
24

ECCN Code
EAR99

Resistance
85mOhm

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Additional Feature
POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING

Subcategory
Power Management Circuits

Technology
BICMOS

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Supply Voltage
3.3V

Terminal Pitch
0.65mm

Base Part Number
TPS2223

Pin Count
24

Number of Outputs
4

Max Output Current
1A

Supply Voltage-Max (Vsup)
3.6V

Power Supplies
3.35V

Supply Voltage-Min (Vsup)
3V

Number of Channels
3

Interface
Serial

Analog IC - Other Type
POWER SUPPLY SUPPORT CIRCUIT

Number of Ports
2

Output Configuration
High Side

Voltage - Supply (Vcc/Vdd)
Not Required

Adjustable Threshold
NO

Switch Type
PCMCIA Switch

Nominal Input Voltage
13.5V

Ratio - Input:Output
3:4

Voltage - Load
3.3V 5V

Min Current Limit
1A

Fault Protection
Current Limiting (Fixed), Over Temperature

Rds On (Typ)
95m ?

Download datasheets and manufacturer documentation for TI TPS2223ADBR.

PCN Assembly/Origin:

texasinstruments-tps65040zqer-pcnassemblyorigin-8948.pdf

TPS2223ADBR Overview

It is packaged in the form of a Tape & Reel (TR).It is included with the 24-SSOP (0.209, 5.30mm Width) package as well.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is PCMCIA Switch.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The lighting driver has a total of 4 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.There are Status Flag features available on the LED driving board.As you can see, it comes from the TPS2223 family.A total of 24 terminations can be found in it.During operation, the 24 pins are used.It is important to note that the LED driving board has 1 functions.To comply with the operation criteria, the maximum output current is reduced to 1A.It is possible to obtain high efficiency with a supply voltage of 3.3V.This LED driver is equipped with a total of 24 pins.In this case, there is 85mOhm resistance in the LED driving board.The LED driver is packaged in an econtainer with a capacity of Power Management Circuits.The maximum supply voltage for this lighting driver is set to 3.6V (Vsup).In order to operate normally, the supply voltage (Vsup) must remain above 3V.This LED driving board uses an analog IC POWER SUPPLY SUPPORT CIRCUIT.A total of 3 channels are available for you to choose from.It has a power supply of 3.35V.In addition, POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING can be produced using this LED driving board.

TPS2223ADBR Features

Supplied from 3.3V
Resistance of 85mOhm
3 channels
Additional features like POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING

TPS2223ADBR Applications

There are a lot of Texas Instruments
TPS2223ADBR Power Switches ICs applications.

Wireless/Networking Cards
Low Voltage I/O System Power
Hard Disk Drives
Solid-State Drives
Hot Swap
HDD and SSD
Hot Swap
Wireless Modem Data Cards
PC Cards
HDD, SSD

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.