TI TPS2097DR

Manufacturer No:

TPS2097DR

Manufacturer:

Package:

16-SOIC (0.154, 3.90mm Width)

Description:

3/5V N-Channel 1.27mm PMIC TPS2097 16 Pin 3.3V 16-SOIC (0.154, 3.90mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

TPS2097DR information

TI TPS2097DR technical specifications, attributes, parameters and parts with similar specifications to TI TPS2097DR.

Type
Parameter

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
16-SOIC (0.154, 3.90mm Width)

Number of Pins
16

Weight
155.100241mg

Operating Temperature
0°C~125°C TJ

Packaging
Tape & Reel (TR)

Feature
Status Flag

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
16

ECCN Code
EAR99

Subcategory
Peripheral Drivers

Technology
MOS

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
NOT SPECIFIED

Number of Functions
4

Supply Voltage
3.3V

Terminal Pitch
1.27mm

Reach Compliance Code
unknown

Time@Peak Reflow Temperature-Max (s)
NOT SPECIFIED

Base Part Number
TPS2097

Pin Count
16

Qualification Status
Not Qualified

Output Type
N-Channel

Operating Supply Voltage
5.5V

Power Supplies
3/5V

Interface
On/Off

Output Configuration
High Side

Output Current
250mA

Voltage - Supply (Vcc/Vdd)
Not Required

Quiescent Current
85?A

Input Type
Non-Inverting

Switch Type
General Purpose

Min Input Voltage
2.7V

Max Input Voltage
5.5V

Nominal Input Voltage
5.5V

Ratio - Input:Output
1:1

Voltage - Load
2.7V~5.5V

Driver Number of Bits
4

Fault Protection
Current Limiting (Fixed), Over Temperature, UVLO

Turn On Time
20000 ?s

Output Peak Current Limit-Nom
0.5A

Rds On (Typ)
80m ?

Built-in Protections
OVER CURRENT; THERMAL; UNDER VOLTAGE

Length
9.9mm

Download datasheets and manufacturer documentation for TI TPS2097DR.

Datasheets:

texasinstruments-tps2097drg4-datasheets-2349.pdf

texasinstruments-tps2097dr-datasheets-9846.pdf

texasinstruments-tps2097dr-datasheets-9847.pdf

TPS2097DR Overview

Tape & Reel (TR) is how it's packaged.The 16-SOIC (0.154, 3.90mm Width) package includes it.This lighting drivere has a mounting type of Surface Mount.There is a General Purpose switch type associated with it.It is recommended that the temperature be set to 0°C~125°C TJ for reliable operation.In this LED driver, there are no outputs available.A supply voltage of Not Required is required for it to operate.There is a maximum output voltage of N-Channel volts.In terms of features, the LED driving board has Status Flag.It belongs to the family TPS2097.The termination count is 16.The 16 pins are used to operate the LED driver.As far as functions are concerned, the lighting driver has 4.High efficiency is possible at 3.3V supply voltage.This lighting driver is mounted in the way of Surface Mount.16 pins are equipped with it.In this case, the output current is set to 250mA.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.A 3/5V power supply is used by the part.In order to achieve the best efficiency, the supply voltage should be set to 5.5V.This LED driver can handle voltages up to 5.5V volts.As far as input voltage goes, it has a minimum of 2.7V volts.

TPS2097DR Features

Supplied from 3.3V

TPS2097DR Applications

There are a lot of Texas Instruments
TPS2097DR Power Switches ICs applications.

Notebook PC
Telecom and Network Systems
PC Card Hot Swap
Storage Drives
Portable/Handheld Devices
Wireless/Networking Cards
Low Voltage I/O System Power
Hard Disk Drives
Solid-State Drives
Hot Swap

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.