TI TPS2010DRG4

Manufacturer No:

TPS2010DRG4

Manufacturer:

Package:

8-SOIC (0.154, 3.90mm Width)

Description:

N-Channel PMIC TPS2010 8 Pin 3V 8-SOIC (0.154, 3.90mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

TPS2010DRG4 information

TI TPS2010DRG4 technical specifications, attributes, parameters and parts with similar specifications to TI TPS2010DRG4.

Type
Parameter

Lifecycle Status
NRND (Last Updated: 4 days ago)

Mounting Type
Surface Mount

Package / Case
8-SOIC (0.154, 3.90mm Width)

Surface Mount
YES

Number of Pins
8

Weight
72.603129mg

Operating Temperature
-40°C~125°C TJ

Packaging
Tape & Reel (TR)

JESD-609 Code
e4

Pbfree Code
yes

Part Status
Not For New Designs

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Resistance
75mOhm

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
1

Supply Voltage
3V

Base Part Number
TPS2010

Pin Count
8

Number of Outputs
1

Max Output Current
200mA

Operating Supply Voltage
5.5V

Number of Channels
1

Interface
On/Off

Analog IC - Other Type
POWER SUPPLY SUPPORT CIRCUIT

Nominal Supply Current
73?A

Output Configuration
High Side

Output Current
200mA

Voltage - Supply (Vcc/Vdd)
Not Required

Max Supply Current
73?A

Adjustable Threshold
NO

Quiescent Current
73?A

Input Type
Non-Inverting

Switch Type
General Purpose

Min Input Voltage
2.7V

Max Input Voltage
5.5V

Nominal Input Voltage
5.5V

Ratio - Input:Output
1:1

Voltage - Load
2.7V~5.5V

Min Current Limit
220mA

Fault Protection
Current Limiting (Fixed), Over Temperature

Rds On (Typ)
75m ?

Height
1.75mm

Download datasheets and manufacturer documentation for TI TPS2010DRG4.

Datasheets:

texasinstruments-tps2010drg4-datasheets-4280.pdf

texasinstruments-tps2010drg4-datasheets-4281.pdf

texasinstruments-tps2010drg4-datasheets-4282.pdf

TPS2010DRG4 Overview

It is packaged in the form of a Tape & Reel (TR).It is included with the 8-SOIC (0.154, 3.90mm Width) package as well.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~125°C TJ.The lighting driver has a total of 1 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of N-Channel volts can be obtained with this LED driver.As you can see, it comes from the TPS2010 family.A total of 8 terminations can be found in it.During operation, the 8 pins are used.It is important to note that the LED driving board has 1 functions.To comply with the operation criteria, the maximum output current is reduced to 200mA.It is possible to obtain high efficiency with a supply voltage of 3V.This LED driver is equipped with a total of 8 pins.In this case, there is 75mOhm resistance in the LED driving board.This results in a 200mA output current.This LED driving board uses an analog IC POWER SUPPLY SUPPORT CIRCUIT.A total of 1 channels are available for you to choose from.For maximum efficiency, the supply voltage should be set to 5.5V.The maximum input voltage of the LED driver is 5.5V volts.There is a minimum input voltage of 2.7V volts for this LED driver.This system has a maximum current requirement of 73?A.

TPS2010DRG4 Features

Supplied from 3V
Resistance of 75mOhm
1 channels

TPS2010DRG4 Applications

There are a lot of Texas Instruments
TPS2010DRG4 Power Switches ICs applications.

Wireless/Networking Cards
Low Voltage I/O System Power
Hard Disk Drives
Solid-State Drives
Hot Swap
HDD and SSD
Hot Swap
Wireless Modem Data Cards
PC Cards
HDD, SSD

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.