TI TLV2773IDGSRG4

Manufacturer No:

TLV2773IDGSRG4

Manufacturer:

Package:

MSOP

Description:

2 Channels 50mA per Channel 60pA 60 dB Instrumentational OP Amps 0.00035?A 3V 10 Pins MSOP

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

TLV2773IDGSRG4 information

TI TLV2773IDGSRG4 technical specifications, attributes, parameters and parts with similar specifications to TI TLV2773IDGSRG4.

Type
Parameter

Package / Case
MSOP

Surface Mount
YES

Number of Pins
10

Packaging
Tape & Reel

JESD-609 Code
e4

Pbfree Code
yes

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
10

ECCN Code
EAR99

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Max Operating Temperature
125°C

Min Operating Temperature
-40°C

Subcategory
Operational Amplifier

Packing Method
TAPE AND REEL

Technology
CMOS

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
2

Supply Voltage
2.7V

Terminal Pitch
0.5mm

Pin Count
10

Operating Supply Voltage
3V

Temperature Grade
AUTOMOTIVE

Max Supply Voltage
6V

Min Supply Voltage
2.5V

Operating Supply Current
1mA

Nominal Supply Current
4mA

Current - Output
50mA

Slew Rate
10.5 V/?s

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
OPERATIONAL AMPLIFIER

Common Mode Rejection Ratio
60 dB

Current - Input Bias
60pA

Output Current per Channel
50mA

Input Offset Voltage (Vos)
700?V

Bandwidth
5.1MHz

Gain Bandwidth Product
5.1MHz

Unity Gain BW-Nom
4800 kHz

Voltage Gain
113.06dB

Average Bias Current-Max (IIB)
0.00035?A

Low-Offset
NO

Frequency Compensation
YES

Max Dual Supply Voltage
3V

Low-Bias
YES

Micropower
NO

Min Dual Supply Voltage
1.25V

Download datasheets and manufacturer documentation for TI TLV2773IDGSRG4.

Datasheets:

texasinstruments-tlv2773idgsrg4-datasheets-8115.pdf

texasinstruments-tlv2773idgsrg4-datasheets-8116.pdf

TLV2773IDGSRG4 Overview

Packaging for the buffer amplifier is in the form of a MSOP case. A OPERATIONAL AMPLIFIER-type buffer amplifier is shown here. There is a Tape & Reel case that is delivered with the instrumentation amplifiers. A total of 10 terminations have been reported in the past few weeks. Buffer amplifier has a total of 10 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 2.7V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. An 10-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 700?V. Using a supply current of 1mA , this buffer op amp will be able to operate. Keeping the voltage gain at 113.06dB is the best course of action. 2 channels are available on the instrumentation amplifier. This op amp needs to be operated at a temperature of not less than -40°C degrees Celsius in order to function properly. You should not use op amp above 125°C degrees. The operating supply voltage of the buffer op amp is rated at 3V. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps. Regarding the voltage of the supply, this electrical part can work from a voltage as low as 6V, and this is an excellent feature. In order to ensure that the instrumentation amplifier's supply voltage remains above 2.5V, it is recommended to keep it higher. This electronic part should be conducted with a dual supply voltage of 3V volts for this part.

TLV2773IDGSRG4 Features

10 Pins
supply voltage of 2.7V
113.06dB voltage gain

TLV2773IDGSRG4 Applications

There are a lot of Texas Instruments
TLV2773IDGSRG4 Instrumentational OP Amps applications.

single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.