TI TLV2771CDRG4

Manufacturer No:

TLV2771CDRG4

Manufacturer:

Package:

Description:

1 Channels 50mA per Channel 60pA 60 dB Instrumentational OP Amps 3V 8 Pins D

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

TLV2771CDRG4 information

TI TLV2771CDRG4 technical specifications, attributes, parameters and parts with similar specifications to TI TLV2771CDRG4.

Type
Parameter

Package / Case
D

Surface Mount
YES

Number of Pins
8

Packaging
Tape & Reel

JESD-609 Code
e4

Pbfree Code
yes

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Max Operating Temperature
70°C

Min Operating Temperature
0°C

Subcategory
Operational Amplifier

Technology
CMOS

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
1

Supply Voltage
2.7V

Pin Count
8

Operating Supply Voltage
3V

Power Supplies
2.7/5V

Temperature Grade
COMMERCIAL

Number of Channels
1

Max Supply Voltage
6V

Min Supply Voltage
2.5V

Nominal Supply Current
2mA

Current - Output
50mA

Slew Rate
10.5 V/?s

Amplifier Type
OPERATIONAL AMPLIFIER

Common Mode Rejection Ratio
60 dB

Current - Input Bias
60pA

Output Current per Channel
50mA

Input Offset Voltage (Vos)
500?V

Bandwidth
5.1MHz

Gain Bandwidth Product
5.1MHz

Unity Gain BW-Nom
4800 kHz

Voltage Gain
113.06dB

Low-Offset
NO

Frequency Compensation
YES

Max Dual Supply Voltage
3V

Low-Bias
YES

Micropower
NO

Min Dual Supply Voltage
1.25V

Bias Current-Max (IIB) @25C
0.00006?A

Programmable Power
NO

Nominal Gain Bandwidth Product
4.8MHz

Max I/O Voltage
2.5mV

Power
NO

Download datasheets and manufacturer documentation for TI TLV2771CDRG4.

TLV2771CDRG4 Overview

In order to protect the op amps, a D case is used. There are two types of operational amplifiers in this circuit. In the case of Tape & Reel cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 2.7V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 500?V. In order for this instrumentation amplifier to operate, the supply current needs to be between 1mA and 10 . Maintain 113.06dB as the voltage gain. Buffer op amp is equipped with 1 channels on the device. It is recommended that the temperature of this op amp ic should not fall below 0°C degrees Fahrenheit at any time. Linear amplifier shouldn't be used above 70°C degrees. The operating supply voltage of the buffer op amp is rated at 3V. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 6V. It is recommended that you keep the instrumentation amplifier's supply voltage higher than 2.5V when using it. It is recommended that you conduct this electronic part using the dual supply voltage of 3V.

TLV2771CDRG4 Features

8 Pins
supply voltage of 2.7V
113.06dB voltage gain

TLV2771CDRG4 Applications

There are a lot of Texas Instruments
TLV2771CDRG4 Instrumentational OP Amps applications.

Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.