TI TLV2770IDGKRG4

Manufacturer No:

TLV2770IDGKRG4

Manufacturer:

Package:

MSOP

Description:

1 Channels 50mA per Channel 60pA 60 dB Instrumentational OP Amps 0.00035μA 3V 8 Pins MSOP

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

TLV2770IDGKRG4 information

TI TLV2770IDGKRG4 technical specifications, attributes, parameters and parts with similar specifications to TI TLV2770IDGKRG4.

Type
Parameter

Package / Case
MSOP

Surface Mount
YES

Number of Pins
8

Packaging
Tape & Reel

JESD-609 Code
e4

Pbfree Code
yes

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Max Operating Temperature
125°C

Min Operating Temperature
-40°C

Subcategory
Operational Amplifier

Packing Method
TAPE AND REEL

Technology
CMOS

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
1

Supply Voltage
2.7V

Terminal Pitch
0.65mm

Pin Count
8

Operating Supply Voltage
3V

Power Supplies
2.7/5V

Number of Channels
1

Max Supply Voltage
6V

Min Supply Voltage
2.5V

Operating Supply Current
1mA

Nominal Supply Current
2mA

Current - Output
50mA

Slew Rate
10.5 V/μs

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
OPERATIONAL AMPLIFIER

Common Mode Rejection Ratio
60 dB

Current - Input Bias
60pA

Output Current per Channel
50mA

Input Offset Voltage (Vos)
500μV

Bandwidth
5.1MHz

Gain Bandwidth Product
5.1MHz

Unity Gain BW-Nom
4800 kHz

Voltage Gain
113.06dB

Average Bias Current-Max (IIB)
0.00035μA

Low-Offset
NO

Frequency Compensation
YES

Max Dual Supply Voltage
3V

Low-Bias
YES

Micropower
NO

Download datasheets and manufacturer documentation for TI TLV2770IDGKRG4.

TLV2770IDGKRG4 Overview

The linear amplifier is packaged in a MSOP case. This is a OPERATIONAL AMPLIFIER type op amp. Linear amplifier is delivered in a Tape & Reel case. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins. Please take in mind that this instrumentation amplifier should be run at 2.7V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. The buffer op amp includes 8 pins. Regarding input offset voltage, op amp rates 500μV. This op amp can operate from a supply current at 1mA. Voltage gain should remain at 113.06dB. The op amp ic has 1 channels on it. The temperature should not be lower than -40°C for operational amplifier ics to operate. Use op amps only at temperatures no higher than 125°C. The operating supply voltage of the buffer op amp is rated at 3V. TAPE AND REEL is adopted to pack the instrumentation amplifier. With regard to the supply voltage, this electrical component is capable of working from under 6V. It is advised to keep the op amp's supply voltage higher than 2.5V. You should conduct this electronic component under the dual supply voltage of 3V.

TLV2770IDGKRG4 Features

8 Pins
supply voltage of 2.7V
113.06dB voltage gain

TLV2770IDGKRG4 Applications

There are a lot of Texas Instruments
TLV2770IDGKRG4 Instrumentational OP Amps applications.

Inverse/same-phase proportional circuit
Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.