TI TLV274QPWRQ1

Manufacturer No:

TLV274QPWRQ1

Manufacturer:

Package:

14-TSSOP (0.173, 4.40mm Width)

Description:

13mA per Channel 1pA 58 dB Instrumentational OP Amps 0.00006μA 8V 2.7V~16V ±1.35V~8V TLV274 14 Pins 14-TSSOP (0.173, 4.40mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

TLV274QPWRQ1 information

TI TLV274QPWRQ1 technical specifications, attributes, parameters and parts with similar specifications to TI TLV274QPWRQ1.

Type
Parameter

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
14-TSSOP (0.173, 4.40mm Width)

Number of Pins
14

Operating Temperature
-40°C~125°C

Packaging
Tape & Reel (TR)

Series
Automotive, AEC-Q100

Pbfree Code
no

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
14

ECCN Code
EAR99

Subcategory
Operational Amplifier

Packing Method
TAPE AND REEL

Technology
CMOS

Terminal Position
DUAL

Terminal Form
GULL WING

Number of Functions
4

Supply Voltage
2.7V

Terminal Pitch
0.65mm

Base Part Number
TLV274

Pin Count
14

Output Type
Rail-to-Rail

Operating Supply Voltage
8V

Power Supplies
+-1.35/+-8/2.7/16V

Operating Supply Current
750μA

Nominal Supply Current
3.6mA

Power Dissipation
374mW

Output Current
13mA

Slew Rate
2.1V/μs

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
General Purpose

Common Mode Rejection Ratio
58 dB

Current - Input Bias
1pA

Voltage - Supply, Single/Dual (±)
2.7V~16V ±1.35V~8V

Output Current per Channel
13mA

Input Offset Voltage (Vos)
5mV

Gain Bandwidth Product
3MHz

Unity Gain BW-Nom
2400 kHz

Voltage Gain
110dB

Average Bias Current-Max (IIB)
0.00006μA

Low-Offset
NO

Frequency Compensation
YES

Supply Voltage Limit-Max
16.5V

Voltage - Input Offset
500μV

Current - Output / Channel
8mA

Low-Bias
YES

Download datasheets and manufacturer documentation for TI TLV274QPWRQ1.

TLV274QPWRQ1 Overview

Packaging for the buffer amplifier is in the form of a 14-TSSOP (0.173, 4.40mm Width) case. A General Purpose-type buffer amplifier is shown here. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. A total of 14 terminations have been reported in the past few weeks. Buffer amplifier has a total of 14 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 2.7V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. An 14-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 5mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. Using a supply current of 750μA , this buffer op amp will be able to operate. 110dB should be the voltage gain. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. There is an operating supply voltage rating of 4 for this operational amplifier, which is rated at the manufacturer. The operating supply voltage of the buffer op amp is rated at 8V. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps. The Automotive, AEC-Q100 stands for the buffer op amp's serial number.

TLV274QPWRQ1 Features

14 Pins
supply voltage of 2.7V
110dB voltage gain
Output Type: Rail-to-Rail

TLV274QPWRQ1 Applications

There are a lot of Texas Instruments
TLV274QPWRQ1 Instrumentational OP Amps applications.

single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.