TI TLV271IDG4

Manufacturer No:

TLV271IDG4

Manufacturer:

Package:

SOIC

Description:

13mA per Channel 60pA 69 dB Instrumentational OP Amps 0.00006μA 5V 8 Pins SOIC

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

TLV271IDG4 information

TI TLV271IDG4 technical specifications, attributes, parameters and parts with similar specifications to TI TLV271IDG4.

Type
Parameter

Package / Case
SOIC

Surface Mount
YES

Number of Pins
8

Packaging
Rail/Tube

JESD-609 Code
e4

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Max Operating Temperature
125°C

Min Operating Temperature
-40°C

Subcategory
Operational Amplifier

Technology
CMOS

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
1

Supply Voltage
2.7V

Pin Count
8

Operating Supply Voltage
5V

Number of Elements
1

Temperature Grade
AUTOMOTIVE

Max Supply Voltage
16V

Min Supply Voltage
2.7V

Nominal Supply Current
800μA

Power Dissipation
396mW

Current - Output
13mA

Slew Rate
2.4 V/μs

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
OPERATIONAL AMPLIFIER

Common Mode Rejection Ratio
69 dB

Current - Input Bias
60pA

Output Current per Channel
13mA

Input Offset Voltage (Vos)
5mV

Bandwidth
3MHz

Gain Bandwidth Product
3MHz

Unity Gain BW-Nom
3000 kHz

Voltage Gain
110dB

Average Bias Current-Max (IIB)
0.00006μA

Power Supply Rejection Ratio (PSRR)
70dB

Low-Offset
NO

Frequency Compensation
YES

Max Dual Supply Voltage
8V

Low-Bias
YES

Micropower
NO

Min Dual Supply Voltage
1.35V

Bias Current-Max (IIB) @25C
0.00006μA

Download datasheets and manufacturer documentation for TI TLV271IDG4.

TLV271IDG4 Overview

There is a SOIC case in which the instrumentation amplifier is packaged. Buffer amps of this type are called OPERATIONAL AMPLIFIER-types. A Rail/Tube case is used to deliver the buffer op amp. The number of terminations is approaching the 8 mark. The total number of pins on linear amplifier is 8. The linear amplifier should be run at 2.7V at all times, so please keep that in mind when using it. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 8 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 5mV. It is possible to operate this buffer amplifier from a supply current of 625μA . 110dB should be the voltage gain. In order for this buffer op amp to function, it should have a temperature of at least -40°C degrees Celsius. At temperatures greater than 125°C, Instrumentation amplifier should not be used. There are 1 elements in total in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 5V. The electrical part is capable of being powered by a voltage of under 16V, which means that it can be used with any voltage supply. As a rule of thumb, the supply voltage of the op amp should not be lower than 2.7V. As a general rule, you should conduct this electronic component under dual supply voltages of 8V volts.

TLV271IDG4 Features

8 Pins
supply voltage of 2.7V
110dB voltage gain

TLV271IDG4 Applications

There are a lot of Texas Instruments
TLV271IDG4 Instrumentational OP Amps applications.

Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.