TI TLV2622IDGKRG4

Manufacturer No:

TLV2622IDGKRG4

Manufacturer:

Package:

MSOP

Description:

2 Channels 28mA per Channel 50pA 77 dB Instrumentational OP Amps 2.75V 8 Pins MSOP

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

TLV2622IDGKRG4 information

TI TLV2622IDGKRG4 technical specifications, attributes, parameters and parts with similar specifications to TI TLV2622IDGKRG4.

Type
Parameter

Package / Case
MSOP

Surface Mount
YES

Number of Pins
8

Packaging
Tape & Reel

JESD-609 Code
e4

Pbfree Code
yes

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Max Operating Temperature
125°C

Min Operating Temperature
-40°C

Subcategory
Operational Amplifier

Packing Method
TAPE AND REEL

Technology
CMOS

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
2

Supply Voltage
5V

Terminal Pitch
0.65mm

Pin Count
8

Operating Supply Voltage
2.75V

Power Supplies
3/5V

Number of Channels
2

Max Supply Voltage
5.5V

Min Supply Voltage
2.7V

Operating Supply Current
800?A

Nominal Supply Current
2mA

Current - Output
28mA

Slew Rate
4.5 V/?s

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
OPERATIONAL AMPLIFIER

Common Mode Rejection Ratio
77 dB

Current - Input Bias
50pA

Output Current per Channel
28mA

Input Offset Voltage (Vos)
250?V

Bandwidth
11MHz

Gain Bandwidth Product
11MHz

Unity Gain BW-Nom
11000 kHz

Voltage Gain
100dB

Low-Offset
NO

Frequency Compensation
YES

Max Dual Supply Voltage
2.75V

Low-Bias
YES

Micropower
NO

Min Dual Supply Voltage
1.35V

Download datasheets and manufacturer documentation for TI TLV2622IDGKRG4.

TLV2622IDGKRG4 Overview

Packaged in a MSOP case, the buffer op amp is ready to use. An op amp ic of the OPERATIONAL AMPLIFIER type. The op amp is delivered to you in a Tape & Reel case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 5V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 250?V for this buffer op amp. As long as the supply current of the chip does not exceed 800?A, this op amp ic can operate. 100dB should remain the voltage gain. As far as the device is concerned, buffer amplifier has 2 channels. For the buffer op amp to operate properly, it must be above the temperature of -40°C degrees Celsius. No temperature greater than 125°C should be used. The operating supply voltage of the buffer op amp is rated at 2.75V. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 5.5V. A high supply voltage of more than 2.7V is recommended for the instrumentation amplifier's supply voltage. As a rule of thumb, you should conduct this electronic part under a dual voltage supply of 2.75V volts.

TLV2622IDGKRG4 Features

8 Pins
supply voltage of 5V
100dB voltage gain

TLV2622IDGKRG4 Applications

There are a lot of Texas Instruments
TLV2622IDGKRG4 Instrumentational OP Amps applications.

Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.