TI TLV2382IDRG4

Manufacturer No:

TLV2382IDRG4

Manufacturer:

Package:

SOIC

Description:

400?A per Channel 60pA 54 dB Instrumentational OP Amps 0.001?A 8V 8 Pins SOIC

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

TLV2382IDRG4 information

TI TLV2382IDRG4 technical specifications, attributes, parameters and parts with similar specifications to TI TLV2382IDRG4.

Type
Parameter

Package / Case
SOIC

Surface Mount
YES

Number of Pins
8

Packaging
Tape and Reel

JESD-609 Code
e4

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Max Operating Temperature
125°C

Min Operating Temperature
-40°C

Subcategory
Operational Amplifier

Technology
BIMOS

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
2

Supply Voltage
5V

Pin Count
8

Operating Supply Voltage
8V

Number of Elements
2

Temperature Grade
AUTOMOTIVE

Max Supply Voltage
16V

Min Supply Voltage
2.7V

Nominal Supply Current
20?A

Power Dissipation
710mW

Current - Output
400?A

Slew Rate
0.06 V/?s

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
OPERATIONAL AMPLIFIER

Common Mode Rejection Ratio
54 dB

Current - Input Bias
60pA

Output Current per Channel
400?A

Input Offset Voltage (Vos)
4.5mV

Bandwidth
160 kHz

Gain Bandwidth Product
160 kHz

Unity Gain BW-Nom
160 kHz

Voltage Gain
100dB

Average Bias Current-Max (IIB)
0.001?A

Power Supply Rejection Ratio (PSRR)
74dB

Low-Offset
NO

Frequency Compensation
YES

Max Dual Supply Voltage
8V

Low-Bias
YES

Micropower
YES

Min Dual Supply Voltage
1.35V

Bias Current-Max (IIB) @25C
0.00006?A

Download datasheets and manufacturer documentation for TI TLV2382IDRG4.

TLV2382IDRG4 Overview

A SOIC case is used to package the op amp. OPERATIONAL AMPLIFIER-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tape and Reel case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. It should be noted that this op amp is a type of Operational Amplifier device. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 4.5mV. An 7?A volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. In order for op amp to function properly, the temperature should not be lower than -40°C degrees Celsius. Instrumentation amplifier should only be used at temperatures up to 125°C. There are a total of 2 elements in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 8V. I would like to point out that this electrical component is capable of working from a voltage below 16V as far as the power supply is concerned. As a general rule, it is advisable to keep the op amp's supply voltage above 2.7V at all times. The dual supply voltage of 8V should be used for the conduct of this electronic component.

TLV2382IDRG4 Features

8 Pins
supply voltage of 5V
100dB voltage gain

TLV2382IDRG4 Applications

There are a lot of Texas Instruments
TLV2382IDRG4 Instrumentational OP Amps applications.

Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.