TI TLE2022AIDRG4

Manufacturer No:

TLE2022AIDRG4

Manufacturer:

Package:

SOIC

Description:

30mA per Channel 70nA 87 dB Instrumentational OP Amps 0.09μA 20V 8 Pins SOIC

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

TLE2022AIDRG4 information

TI TLE2022AIDRG4 technical specifications, attributes, parameters and parts with similar specifications to TI TLE2022AIDRG4.

Type
Parameter

Package / Case
SOIC

Surface Mount
YES

Number of Pins
8

Packaging
Tape and Reel

JESD-609 Code
e4

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Max Operating Temperature
85°C

Min Operating Temperature
-40°C

Subcategory
Operational Amplifier

Technology
BIPOLAR

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
2

Supply Voltage
15V

Pin Count
8

Operating Supply Voltage
20V

Number of Elements
2

Temperature Grade
INDUSTRIAL

Max Supply Voltage
40V

Min Supply Voltage
4V

Nominal Supply Current
700μA

Power Dissipation
725mW

Slew Rate
0.5 V/μs

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
OPERATIONAL AMPLIFIER

Common Mode Rejection Ratio
87 dB

Current - Input Bias
70nA

Output Current per Channel
30mA

Input Offset Voltage (Vos)
400μV

Bandwidth
1.7MHz

Gain Bandwidth Product
1.7MHz

Neg Supply Voltage-Nom (Vsup)
-15V

Unity Gain BW-Nom
2800 kHz

Voltage Gain
123.52dB

Average Bias Current-Max (IIB)
0.09μA

Low-Offset
YES

Frequency Compensation
YES

Max Dual Supply Voltage
20V

Micropower
YES

Min Dual Supply Voltage
2V

Bias Current-Max (IIB) @25C
0.07μA

Nominal Gain Bandwidth Product
1.7MHz

Max I/O Voltage
400μV

Download datasheets and manufacturer documentation for TI TLE2022AIDRG4.

TLE2022AIDRG4 Overview

There is a SOIC case in which the instrumentation amplifier is packaged. Buffer amps of this type are called OPERATIONAL AMPLIFIER-types. A Tape and Reel case is used to deliver the buffer op amp. The number of terminations is approaching the 8 mark. The total number of pins on linear amplifier is 8. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 8 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 400μV. It is possible to operate this buffer amplifier from a supply current of 550μA . 123.52dB should be the voltage gain. In order for this buffer op amp to function, it should have a temperature of at least -40°C degrees Celsius. At temperatures greater than 85°C, Instrumentation amplifier should not be used. There are 2 elements in total in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 20V. The electrical part is capable of being powered by a voltage of under 40V, which means that it can be used with any voltage supply. As a rule of thumb, the supply voltage of the op amp should not be lower than 4V. As a general rule, you should conduct this electronic component under dual supply voltages of 20V volts.

TLE2022AIDRG4 Features

8 Pins
supply voltage of 15V
123.52dB voltage gain

TLE2022AIDRG4 Applications

There are a lot of Texas Instruments
TLE2022AIDRG4 Instrumentational OP Amps applications.

Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.