TI TLC4502AQDRG4

Manufacturer No:

TLC4502AQDRG4

Manufacturer:

Package:

8-SOIC (0.154, 3.90mm Width)

Description:

50mA per Channel 1nA 90 dB Instrumentational OP Amps 0.00006μA 4V~6V ±2V~3V TLC4502 8 Pins 8-SOIC (0.154, 3.90mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

TLC4502AQDRG4 information

TI TLC4502AQDRG4 technical specifications, attributes, parameters and parts with similar specifications to TI TLC4502AQDRG4.

Type
Parameter

Mounting Type
Surface Mount

Package / Case
8-SOIC (0.154, 3.90mm Width)

Surface Mount
YES

Number of Pins
8

Operating Temperature
-40°C~125°C

Packaging
Tape & Reel (TR)

Series
LinEPIC™, Self-Cal™

JESD-609 Code
e4

Pbfree Code
yes

Part Status
Discontinued

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Subcategory
Operational Amplifier

Packing Method
TAPE AND REEL

Technology
CMOS

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
2

Supply Voltage
5V

Base Part Number
TLC4502

Pin Count
8

Power Supplies
5V

Number of Circuits
2

Operating Supply Current
2.5mA

Nominal Supply Current
3.5mA

Output Current
50mA

Slew Rate
2.5V/μs

Architecture
CHOPPER-STAB

Amplifier Type
General Purpose

Common Mode Rejection Ratio
90 dB

Current - Input Bias
1nA

Voltage - Supply, Single/Dual (±)
4V~6V ±2V~3V

Output Current per Channel
50mA

Input Offset Voltage (Vos)
10μV

Bandwidth
4.7MHz

Unity Gain BW-Nom
4700 kHz

Voltage Gain
120dB

Average Bias Current-Max (IIB)
0.00006μA

Low-Offset
YES

Frequency Compensation
YES

Supply Voltage Limit-Max
7V

Low-Bias
YES

Bias Current-Max (IIB) @25C
0.00006μA

Max I/O Voltage
50μV

Download datasheets and manufacturer documentation for TI TLC4502AQDRG4.

TLC4502AQDRG4 Overview

The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. This is a General Purpose type op amp. Linear amplifier is delivered in a Tape & Reel (TR) case. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins. Please take in mind that this instrumentation amplifier should be run at 5V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. The buffer op amp includes 8 pins. Regarding input offset voltage, op amp rates 10μV. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, this op amp functions well at -40°C~125°C. This op amp can operate from a supply current at 2.5mA. Voltage gain should remain at 120dB. There are 2 circuits on this op amp. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. TAPE AND REEL is adopted to pack the instrumentation amplifier. LinEPIC™, Self-Cal™ corresponds to the op amp's series.

TLC4502AQDRG4 Features

8 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail

TLC4502AQDRG4 Applications

There are a lot of Texas Instruments
TLC4502AQDRG4 Instrumentational OP Amps applications.

Inverse/same-phase proportional circuit
Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.