TI TLC393CDRG4

Manufacturer No:

TLC393CDRG4

Manufacturer:

Package:

SOIC

Description:

2 Channels 6mA per Channel 600pA 84 dB Instrumentational OP Amps 0.0006?A 5V 8 Pins SOIC

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

TLC393CDRG4 information

TI TLC393CDRG4 technical specifications, attributes, parameters and parts with similar specifications to TI TLC393CDRG4.

Type
Parameter

Mount
Surface Mount

Package / Case
SOIC

Number of Pins
8

Weight
72.603129mg

Packaging
Tape and Reel

JESD-609 Code
e4

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Type
General Purpose

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Max Operating Temperature
125°C

Min Operating Temperature
-40°C

Subcategory
Comparator

Technology
CMOS

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
2

Supply Voltage
5V

Pin Count
8

Operating Supply Voltage
5V

Power Supplies
5V

Temperature Grade
COMMERCIAL

Max Supply Voltage
16V

Min Supply Voltage
3V

Power Dissipation-Max
725mW

Nominal Supply Current
20?A

Power Dissipation
725mW

Max Supply Current
20?A

Current - Output
20mA

Propagation Delay
4.5 ?s

Quiescent Current
50?A

Response Time
1.1 ?s

Common Mode Rejection Ratio
84 dB

Current - Input Bias
600pA

Output Current per Channel
6mA

Input Offset Voltage (Vos)
5mV

Average Bias Current-Max (IIB)
0.0006?A

Power Supply Rejection Ratio (PSRR)
84dB

Bias Current-Max (IIB) @25C
0.0006?A

Max Input Current
5pA

Height
1.58mm

Length
4.9mm

Width
3.91mm

Radiation Hardening
No

RoHS Status
RoHS Compliant

Download datasheets and manufacturer documentation for TI TLC393CDRG4.

TLC393CDRG4 Overview

In the package, you will find a SOIC-case to contain the op amp ic. A Tape and Reel case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 5V battery. This particular linear amplifier is a type of Comparator device, to be precise. The op amp ic has an array of 8 pins on it. Op amp rates 5mV as input offset voltage. On the buffer amps, there are 2 channels that can be used. To operate this buffer amplifier, the temperature must not be lower than -40°C. A temperature greater than 125°C should not be used for the operation of buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5V. This electric component can work from a voltage of under 16V as far as supply voltage is concerned. A voltage of 3V or higher is recommended for the linear amplifier's supply voltage. The current is quiescent at 50?A.

TLC393CDRG4 Features

8 Pins
supply voltage of 5V

TLC393CDRG4 Applications

There are a lot of Texas Instruments
TLC393CDRG4 Instrumentational OP Amps applications.

Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
Signal operation
Video computer boards

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.