TI TLC27L2IPWRG4

Manufacturer No:

TLC27L2IPWRG4

Manufacturer:

Package:

TSSOP

Description:

30mA per Channel 60pA 65 dB Instrumentational OP Amps 8 Pins TSSOP

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

TLC27L2IPWRG4 information

TI TLC27L2IPWRG4 technical specifications, attributes, parameters and parts with similar specifications to TI TLC27L2IPWRG4.

Type
Parameter

Mount
Surface Mount

Package / Case
TSSOP

Number of Pins
8

Packaging
Tape and Reel

JESD-609 Code
e4

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Max Operating Temperature
85°C

Min Operating Temperature
-40°C

Subcategory
Operational Amplifier

Technology
CMOS

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
2

Supply Voltage
5V

Terminal Pitch
0.65mm

Pin Count
8

Number of Elements
2

Temperature Grade
INDUSTRIAL

Max Supply Voltage
16V

Min Supply Voltage
4V

Nominal Supply Current
46μA

Slew Rate
0.03 V/μs

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
OPERATIONAL AMPLIFIER

Common Mode Rejection Ratio
65 dB

Current - Input Bias
60pA

Output Current per Channel
30mA

Input Offset Voltage (Vos)
10mV

Bandwidth
85 kHz

Gain Bandwidth Product
85 kHz

Unity Gain BW-Nom
130 kHz

Voltage Gain
113.62dB

Low-Offset
NO

Frequency Compensation
YES

Low-Bias
YES

Micropower
YES

Bias Current-Max (IIB) @25C
0.00006μA

Programmable Power
NO

Power
NO

Height
1.15mm

Length
3mm

Width
4.4mm

Radiation Hardening
No

Download datasheets and manufacturer documentation for TI TLC27L2IPWRG4.

TLC27L2IPWRG4 Overview

In order to protect the op amps, a TSSOP case is used. There are two types of operational amplifiers in this circuit. In the case of Tape and Reel cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 10mV. In order for this instrumentation amplifier to operate, the supply current needs to be between 29μA and 10 . Maintain 113.62dB as the voltage gain. It is recommended that the temperature of this op amp ic should not fall below -40°C degrees Fahrenheit at any time. Linear amplifier shouldn't be used above 85°C degrees. As a whole, there are 2 elements that make up this buffer amplifier. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 16V. It is recommended that you keep the instrumentation amplifier's supply voltage higher than 4V when using it.

TLC27L2IPWRG4 Features

8 Pins
supply voltage of 5V
113.62dB voltage gain

TLC27L2IPWRG4 Applications

There are a lot of Texas Instruments
TLC27L2IPWRG4 Instrumentational OP Amps applications.

Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.