TI TLC27L2CDRG4

Manufacturer No:

TLC27L2CDRG4

Manufacturer:

Package:

SOIC

Description:

30mA per Channel 60pA 65 dB Instrumentational OP Amps 0.0006μA 8 Pins SOIC

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

TLC27L2CDRG4 information

TI TLC27L2CDRG4 technical specifications, attributes, parameters and parts with similar specifications to TI TLC27L2CDRG4.

Type
Parameter

Package / Case
SOIC

Surface Mount
YES

Number of Pins
8

Packaging
Tape and Reel

JESD-609 Code
e4

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Max Operating Temperature
85°C

Min Operating Temperature
-40°C

Subcategory
Operational Amplifier

Technology
CMOS

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
2

Supply Voltage
5V

Pin Count
8

Number of Elements
2

Temperature Grade
COMMERCIAL

Max Supply Voltage
16V

Min Supply Voltage
3V

Operating Supply Current
29μA

Power Dissipation
725mW

Slew Rate
0.03 V/μs

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
OPERATIONAL AMPLIFIER

Common Mode Rejection Ratio
65 dB

Current - Input Bias
60pA

Output Current per Channel
30mA

Input Offset Voltage (Vos)
10mV

Bandwidth
85 kHz

Gain Bandwidth Product
85 kHz

Unity Gain BW-Nom
100 kHz

Voltage Gain
116.9dB

Average Bias Current-Max (IIB)
0.0006μA

Low-Offset
NO

Frequency Compensation
YES

Low-Bias
YES

Micropower
YES

Bias Current-Max (IIB) @25C
0.00006μA

Programmable Power
NO

Nominal Gain Bandwidth Product
85 kHz

Max I/O Voltage
10mV

Height
1.58mm

Length
4.9mm

Download datasheets and manufacturer documentation for TI TLC27L2CDRG4.

TLC27L2CDRG4 Overview

Packaged in a SOIC case, the buffer op amp is ready to use. An op amp ic of the OPERATIONAL AMPLIFIER type. The op amp is delivered to you in a Tape and Reel case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 5V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 10mV for this buffer op amp. As long as the supply current of the chip does not exceed 29μA, this op amp ic can operate. 116.9dB should remain the voltage gain. For the buffer op amp to operate properly, it must be above the temperature of -40°C degrees Celsius. No temperature greater than 85°C should be used. The linear amplifier consists of 2 different elements in total. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 16V. A high supply voltage of more than 3V is recommended for the instrumentation amplifier's supply voltage.

TLC27L2CDRG4 Features

8 Pins
supply voltage of 5V
116.9dB voltage gain

TLC27L2CDRG4 Applications

There are a lot of Texas Instruments
TLC27L2CDRG4 Instrumentational OP Amps applications.

Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.