TI TLC279IDRG4

Manufacturer No:

TLC279IDRG4

Manufacturer:

Package:

SOIC

Description:

30mA per Channel 60pA 65 dB Instrumentational OP Amps 0.00006?A 14 Pins SOIC

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

TLC279IDRG4 information

TI TLC279IDRG4 technical specifications, attributes, parameters and parts with similar specifications to TI TLC279IDRG4.

Type
Parameter

Package / Case
SOIC

Surface Mount
YES

Number of Pins
14

Packaging
Tape and Reel

JESD-609 Code
e4

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
14

ECCN Code
EAR99

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Max Operating Temperature
85°C

Min Operating Temperature
-40°C

Subcategory
Operational Amplifier

Technology
CMOS

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
4

Supply Voltage
5V

Terminal Pitch
1.27mm

Pin Count
14

Number of Elements
4

Temperature Grade
INDUSTRIAL

Max Supply Voltage
16V

Min Supply Voltage
4V

Nominal Supply Current
8mA

Power Dissipation
950mW

Slew Rate
3.6 V/?s

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
OPERATIONAL AMPLIFIER

Common Mode Rejection Ratio
65 dB

Current - Input Bias
60pA

Output Current per Channel
30mA

Input Offset Voltage (Vos)
900?V

Bandwidth
1.7MHz

Gain Bandwidth Product
1.7MHz

Unity Gain BW-Nom
1700 kHz

Voltage Gain
87.23dB

Average Bias Current-Max (IIB)
0.00006?A

Low-Offset
NO

Frequency Compensation
YES

Low-Bias
YES

Bias Current-Max (IIB) @25C
0.00006?A

Nominal Gain Bandwidth Product
1.7MHz

Max I/O Voltage
900?V

Length
8.65mm

Height Seated (Max)
1.75mm

Radiation Hardening
No

Download datasheets and manufacturer documentation for TI TLC279IDRG4.

Datasheets:

texasinstruments-tlc279idrg4-datasheets-2188.pdf

texasinstruments-tlc279idrg4-datasheets-2189.pdf

TLC279IDRG4 Overview

In order to protect the op amps, a SOIC case is used. There are two types of operational amplifiers in this circuit. In the case of Tape and Reel cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 14. It consists of a total of 14 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. It has 14 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 900?V. In order for this instrumentation amplifier to operate, the supply current needs to be between 3.8mA and 10 . Maintain 87.23dB as the voltage gain. It is recommended that the temperature of this op amp ic should not fall below -40°C degrees Fahrenheit at any time. Linear amplifier shouldn't be used above 85°C degrees. As a whole, there are 4 elements that make up this buffer amplifier. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 16V. It is recommended that you keep the instrumentation amplifier's supply voltage higher than 4V when using it.

TLC279IDRG4 Features

14 Pins
supply voltage of 5V
87.23dB voltage gain

TLC279IDRG4 Applications

There are a lot of Texas Instruments
TLC279IDRG4 Instrumentational OP Amps applications.

Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.