TI TLC2202IPE4

Manufacturer No:

TLC2202IPE4

Manufacturer:

Package:

PDIP

Description:

50mA per Channel 60pA 80 dB Instrumentational OP Amps 0.00015?A 8V 8 Pins PDIP

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

TLC2202IPE4 information

TI TLC2202IPE4 technical specifications, attributes, parameters and parts with similar specifications to TI TLC2202IPE4.

Type
Parameter

Lifecycle Status
ACTIVE (Last Updated: 5 days ago)

Package / Case
PDIP

Surface Mount
NO

Number of Pins
8

Packaging
Rail/Tube

JESD-609 Code
e4

Pbfree Code
yes

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Max Operating Temperature
70°C

Min Operating Temperature
0°C

Subcategory
Operational Amplifier

Technology
CMOS

Terminal Position
DUAL

Terminal Form
THROUGH-HOLE

Peak Reflow Temperature (Cel)
260

Number of Functions
2

Supply Voltage
5V

Pin Count
8

Operating Supply Voltage
8V

Number of Elements
2

Temperature Grade
INDUSTRIAL

Min Supply Voltage
4.6V

Operating Supply Current
1.8mA

Nominal Supply Current
2.7mA

Power Dissipation
1W

Current - Output
50mA

Slew Rate
2.7 V/?s

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
OPERATIONAL AMPLIFIER

Common Mode Rejection Ratio
80 dB

Current - Input Bias
60pA

Output Current per Channel
50mA

Input Offset Voltage (Vos)
1mV

Bandwidth
1.9MHz

Gain Bandwidth Product
1.9MHz

Neg Supply Voltage-Nom (Vsup)
-5V

Unity Gain BW-Nom
1900 kHz

Voltage Gain
109.97dB

Average Bias Current-Max (IIB)
0.00015?A

Low-Offset
YES

Frequency Compensation
YES

Max Dual Supply Voltage
8V

Low-Bias
YES

Micropower
YES

Download datasheets and manufacturer documentation for TI TLC2202IPE4.

TLC2202IPE4 Overview

A PDIP case is used to package the op amp. OPERATIONAL AMPLIFIER-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Rail/Tube case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. It should be noted that this op amp is a type of Operational Amplifier device. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 1mV. An 1.8mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. In order for op amp to function properly, the temperature should not be lower than 0°C degrees Celsius. Instrumentation amplifier should only be used at temperatures up to 70°C. There are a total of 2 elements in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 8V. I would like to point out that this electrical component is capable of working from a voltage below 16V as far as the power supply is concerned. As a general rule, it is advisable to keep the op amp's supply voltage above 4.6V at all times. The dual supply voltage of 8V should be used for the conduct of this electronic component.

TLC2202IPE4 Features

8 Pins
supply voltage of 5V
109.97dB voltage gain

TLC2202IPE4 Applications

There are a lot of Texas Instruments
TLC2202IPE4 Instrumentational OP Amps applications.

Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.