TI TLC2201ID

Manufacturer No:

TLC2201ID

Manufacturer:

Package:

8-SOIC (0.154, 3.90mm Width)

Description:

1 Channels 50mA per Channel 1pA 85 dB Instrumentational OP Amps 8V 4.6V~16V ±2.3V~8V TLC2201 8 Pins 8-SOIC (0.154, 3.90mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

TLC2201ID information

TI TLC2201ID technical specifications, attributes, parameters and parts with similar specifications to TI TLC2201ID.

Type
Parameter

Lifecycle Status
ACTIVE (Last Updated: 6 days ago)

Factory Lead Time
6 Weeks

Mounting Type
Surface Mount

Package / Case
8-SOIC (0.154, 3.90mm Width)

Surface Mount
YES

Number of Pins
8

Operating Temperature
-40°C~85°C

Packaging
Tube

Series
LinCMOS™

JESD-609 Code
e4

Pbfree Code
yes

Part Status
Active

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Subcategory
Operational Amplifier

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
1

Supply Voltage
5V

Base Part Number
TLC2201

Pin Count
8

Operating Supply Voltage
8V

Number of Channels
1

Operating Supply Current
1.1mA

Nominal Supply Current
1.5mA

Power Dissipation
725mW

Output Current
50mA

Slew Rate
2.7V/μs

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
General Purpose

Common Mode Rejection Ratio
85 dB

Current - Input Bias
1pA

Voltage - Supply, Single/Dual (±)
4.6V~16V ±2.3V~8V

Output Current per Channel
50mA

Input Offset Voltage (Vos)
500μV

Bandwidth
1.9MHz

Neg Supply Voltage-Nom (Vsup)
-5V

Unity Gain BW-Nom
1900 kHz

Voltage Gain
109.97dB

Low-Offset
YES

Frequency Compensation
YES

Supply Voltage Limit-Max
8V

Voltage - Input Offset
100μV

Low-Bias
YES

Download datasheets and manufacturer documentation for TI TLC2201ID.

Datasheets:

texasinstruments-tlc2201id-datasheets-6910.pdf

texasinstruments-tlc2201id-datasheets-6911.pdf

texasinstruments-tlc2201id-datasheets-6912.pdf

texasinstruments-tlc2201id-datasheets-6913.pdf

texasinstruments-tlc2201id-datasheets-6914.pdf

texasinstruments-tlc2201id-datasheets-6915.pdf

TLC2201ID Overview

In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Tube cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 500μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 1.1mA and 10 . Maintain 109.97dB as the voltage gain. Buffer op amp is equipped with 1 channels on the device. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The operating supply voltage of the buffer op amp is rated at 8V. LinCMOS™ is the number that corresponds to the series of the buffer op amp.

TLC2201ID Features

8 Pins
supply voltage of 5V
109.97dB voltage gain
Output Type: Rail-to-Rail

TLC2201ID Applications

There are a lot of Texas Instruments
TLC2201ID Instrumentational OP Amps applications.

Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.